Top 20
Coby DVD-224 DVD Player Questions & Answers
How can I find/reset passwords on Coby 224S and Coby 206
http://www.dvddemystifiziert.de/codefree_en/coby.html
Unfortunately, I don't see Coby 206. There is a 207 however if that would work.
Unlock Coby DVD players - DVD hack
Coby DVD-201 / DVD-217 / DVD-224 / DVD-227 / DVD-237 / DVD-505 / DVD-514 / DVD-527
- Press SETUP
- Press VOL+, VOL-, VOL+, VOL-
- Current RC should be displayed
- Select the RC with RIGHT and LEFT (255=Codefree)
- Press SETUP
- Turn the player off
Coby DVD-202 / DVD-203 / DVD-207 / DVD-208 / DVD-218 / DVD-507 / DVD-508 / DVD-606 / DVD-615
- Method 1:
- Press SETUP
- Press 2, 1, 8, 8
- A new menu entry appears (Version)
- Select it
- Press ENTER
- Select "Region" with RIGHT
- Select RC with UP, DOWN (0 = codefree)
- Press SETUP
- Turn the player off
- Method 2:
- Press SETUP
- Press VOL+, VOL-, VOL+, VOL-
- Current RC should be displayed
- Select the RC with RIGHT and LEFT (255=Codefree)
- Press SETUP
- Turn the player off
Remote code for phillips dvd 711
I hope this helps
You need an OneForAll6 remote (URC 7560)
- Press DVD device button (set remote to DVD)
- Press and hold MAGIC until it flashes 2x
- Enter Setup Code (0539)
- Press MAGIC again
- Enter 085
- Enter 222 222 005 255
- (should be displayed)
- Press PLAY
Wrong disc
Try an other good disc. If the problem perists, repalce the optical pickup unit.
Unable to get auido(sound)
Check your connections and settings. Make sure your Coby DVD is properly connected to your TV and that your TV is set to the correct input setting. If you are using a home theater receiver, again make sure the DVD player is properly connected and the receiver is on the correct input. Consider connecting another device to the same inputs to determine whether the problem is your Coby DVD player or some other device in your setup.
Set "Vol" to at least 50 percent. Disconnect, and then reconnect any headphones or external speakers you may have connected to the player, pushing the plug securely into place to ensure a correct fit.
Check the user manual of the DVD player you are using to watch the DVD. Some stand-alone DVD players do not play certain formats of home-created DVDs. You may find the DVD player does not properly read the format you are using, causing the lack of audio. There isn't anything you can do about this issue other than play the DVD on a different player.
Look over the volume controls of the TV Check the user manual of the DVD player you are using to watch the DVD. Some stand-alone DVD players do not play certain formats of home-created DVDs. You may find the DVD player does not properly read the format you are using, causing the lack of audio. There isn't anything you can do about this issue other than play the DVD on a different player.
Look over the volume controls of the TV or computer. You may just have the volume options turned all the way down (or muted), causing the lack of audio.
Look on the bottom of the DVD for any dust or debris. Debris can block important audio rendering information on the disc, causing the audio problem. Although this generally causes both audio and video issues, cleaning off the bottom of the DVD may help correct the problem.
If after checking the connections, and still no solution, you might need to replace the sound IC...
Contact Coby if the above steps do not fix your problem. The player may be damaged or defective and in need of repair or replacement.Contact Coby. If nothing else has worked, contact the manufacturer directly. You can contact Coby by phone at (800) 681-2629 or by going to cobyusa.com.
Also if the DVD player is still under warranty,you can take it back and get a replacement
I receive a "No Disc"
try to clean the lens buy cd lens cleaner but do not put any liquid on the cleaner make it dry clean
Hi there, I have the
Hello
Either your Coby's Laser Pickup Unit assembly or its srtip wire connected in between laser pickum unit to the main board is faulty. Try replace the strip wire first. If it helps you it is OK. If not, replace the laser pickup unit with same type and number. OK.
I have control universal philips
Code listed for DVD Coby are: 0294, 0296, 0396, 0293,
0146, 0494, 0091, 1710, 1711, 1712, 1812, 1014.
For the Coby 224 try 1711. 1712, or 1812
Coby 224 how to install remote battery
On the back of the remote, push in the direction of the large arrow symbol
molded on the battery cover.
Install batteries as marked + and - on circuit board.
Batteries used are AAA.
Install back cover with arrow symbol entering into slot first.
Cannot get my remote to work
It might be possible that one or more switch be stuck or sticky.
First remove the batteries.
Press all the switches at least a couple of times.
The switches should have a strong tension feel and a snap action.
Some switches would not have the strong feel and snap.
It should be all right if it does not feel flat.
Install back the batteries.
Made sure that the batteries are known to be good.
Not finding what you are looking for?