20 Most Recent Rainbow E series Canister Wet/Dry Vacuum - Page 7 Questions & Answers

0helpful
1answer

Need a disassembly, illustration, parts breakdown

here is a video that will give you full instructions
9/2/2013 3:17:19 PM • Rainbow E series... • Answered on Sep 02, 2013
0helpful
1answer

My e series rainbow smells very badly

You should always put a new hepa filter in any E and E2 series Rainbow vacuum, when it taken to a new home, or every two Years, or so, or if your Doughter makes it get funky smelling. :-) It will smell like the home that it was in, or how ever it smells, until you do.

You can also use fragrances, and deodorizer air freshener in your vacuum, which not only eliminates odors, it add fresh aromas to your air that you breath, in your home, also.

Replace the hepa filter first thing.

The water separator is the thing that spins in the center of the motor where your water basin attaches to it. It looks like a cone shaped fan looking thing. It should be cleaned after every use.

Use your Rainbow separator cleaning brush, or a tooth brush, if you do not have the Rainbow one. They are just like tooth brushes.


Never store your Rainbow canister on your water basin, with or without water in it. It can and will ruin your vacuum in dew time.

You can get manuals either here,
http://www.rainbowsystem.com/ or here,
http://www.rainvac.com

If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph
7/13/2013 8:41:15 PM • Rainbow E series... • Answered on Jul 13, 2013
0helpful
3answers

Rainbow e2 system. Will not power up

the water basin has a safety on it so the unit cannot run without it. if you look on the bottom of the rainbow you can see a small oval shaped space that you can depress just to test and see if it still runs it will only run with this depressed.
6/27/2013 11:09:31 AM • Rainbow E series... • Answered on Jun 27, 2013
0helpful
1answer

I changed the hepa filter on my rainbow vacuum and now the vacuum wont power on. What do I do next?

Did you remove the Baffle Plate Asm at any point? If so, it is possible that the Interlock Plunger could have dropped out. If so, the Rainbow will not turn on.RainVacwww.rainvac.com800-523-0510
6/17/2013 11:28:44 PM • Rainbow E series... • Answered on Jun 17, 2013
0helpful
1answer

Frozen seperator can't be removed

Once you have the nut removed, then take a flat screw driver and lightly pry up on the lip of separator to remove.RainVacwww.rainvac.com800-523-0510
6/14/2013 10:49:42 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

How mount the face plate asm,e, w/molded label

The faceplate has several different configurations depending on the age of your Rainbow. Pictures are needed to see what version you have. Please email pictures to [email protected] so we can help you.RainVacwww.rainvac.com800-523-0510
6/14/2013 10:29:24 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

Why would the motor of a Rainbow E series vacuum cleaner be made

The bearing for the single speed eSERIES is available on our website. Click hereRainVacwww.rainvac.com800-523-0510
6/14/2013 3:59:53 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

Rainbow vacuum head squeels

Your motor or brush roll needs repaired or replaced. The eSERIES has had several different versions and there is 2 different motor possibilities. Give us a call when you are able and we can walk you through on how to determine what version you have.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:56:08 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

The switch that the tank activates is loose and there is a small plastic part that goes somewhere and it looks wedge like.

It is called the interlock switch. Download the schematics from our web site and it will give you images on how to install. You can also call us and speak with a Rainbow Specialist.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:54:05 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

Rainbow e series shooting out dust

Did you place water in the water pan? Are you picking up drywall dust, baby powder, wood ash, etc.? This type of material is difficult to be trapped by water.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:52:09 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

How do I remove the seperator to clean it?

Sometimes the separator can get stuck. Once nut is removed, take a small flat screw driver and get under the lip of the separator to remove.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:49:56 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

I get a Rainbow vacuum E2 series , when I switch on it start after nearly 10 minutes . I cleaned up all the parts , I check everything but I don't find any damaged parts. Can someone help me . Tha

The problem could be either the switch or the controller. We have pickup service at your home for repair. Give us a call when you are able.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:47:37 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

Head doesn't pick up stufff well

When was the last time you changed your belt? Belts should be changed once per year. We can ship new belts to you and have in a day or two.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:46:05 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

Latches

Use a small punch and hammer to remove the brass pin holding in place. The pin has a smooth side and a rough side. The rough side bites into the plastic to hold the pin in place. Punch the pin from the smooth side to remove.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:44:43 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

How do I get the motor out of the power nozzle on the E-series?

The eSERIES Rainbow has several versions of the power nozzle. Some screw apart and others have snap connections. Look at our website on the manuals page to determine your model. You can also call us and speak to a Rainbow Specialist.RainVacwww.rainvac.com800-523-0510
6/14/2013 3:43:12 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

My rainbow wont start. When I try to turn it on it makes a beeping nose and then nothing. How do I fix this? Or what could the problem be?

Most likely your controller is bad. Give us a call and we can see if you are still covered under the warranty.RainVacwww.rainvac.com800-523-0510
6/14/2013 2:47:53 PM • Rainbow E series... • Answered on Jun 14, 2013
0helpful
1answer

Rainbow vacuum won't power on.

Do you have it on the water pan? All models above the eSERIES will not run without the water pan. RainVacwww.rainvac.com800-523-0510
6/14/2013 2:46:41 PM • Rainbow E series... • Answered on Jun 14, 2013
Not finding what you are looking for?
Rainbow E series Canister Wet/Dry Vacuum Logo

587 questions posted

Ask a Question

Usually answered in minutes!

Top Rainbow Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Kardoc

Level 3 Expert

7503 Answers

Are you a Rainbow Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rainbow Vacuums

  • Rainbow Vacuums

Most Popular Question

beater bar only comes spins when reset

  • Vacuums
Loading...