20 Most Recent
Rainbow E series Canister Wet/Dry Vacuum - Page 3 Questions & Answers
It gets louder while running
you could not have enough water in your basin. Or you may have a clog in your hose. You may want to also clean your separator. As well you may want to also replace your Hepa filter.
Aqua mate II wont spray water
It is always best to run hot clean water through the wash cycle to flush out all soap when finished. This helps to prevent soap from drying in the lines and pump. You can also try this to help free a pump that is not working correctly.
Our tech. team is available if needed...
Contact Us
RainVac
How to get solution out of rainbow shampooer
It is always best to run hot clean water through the wash cycle to flush out all soap when finished. This helps to prevent soap from drying in the lines and pump. You can also try this to help free a pump that is not working correctly.
Our tech. team is available if needed...
Contact Us
RainVac
My rainbow stopped working while im shampooing
If the water gets to high in the water pan, then the motor will start hitting it and will make it off balance. This will cause the motor to shut off to protect itself. Wait about an hour for the motor to reset.
Our tech. team is available if needed...
Contact Us
RainVac
Armature and rainbow vacuum
The armature for the E-2 (eSERIES) model Rainbow is not available by itself. You have to purchase the
Motor Rainbow 120v.
Now the new design motors are steps above the original motors so you should see improved performance as well as durability.
Our tech. team is available if needed...
Contact Us
RainVac
Not finding what you are looking for?