Coby TVDVD1350 13 in. TV/DVD Combo - Answered Questions & Fixed issues

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. https://homenol.blogspot.com/ https://remotesearch.blogspot.com/ https://electronicshelponline.blogspot.com/ https://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. /

I have a coby also and unfortunately the company was sold years ago and schematics are very scarce. Comparable units sell for 100.00 at walmart.

Check whether it displays picture by connecting the external antenna, after selecting its input to TV. If yes, the DVD section circuit has the fault. If no, the main board is faulty. Whatever the case be, it will be best to contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/

My device was also buzzing until I realized that I was plugging my headphones into the video port. When I disconnected and plugged into the headphone port, everything was fine

Hi, first check your antenna cable. Second, maybe the tuner is defected or memory chip is burnt.

go into main menu with remote and examine customer settings that affect the picture---likely issue is there.

Hello
you haven't mentioned about whether it plays CDs. if it plays CDs without any problem, and only DVD play does not. the fault is with its Laser Pickup Unit. ther is no repair to this unit, as it can only be replaced with same type and number. Insist on same type and number. Never make a comprmise. OK.

Hello
Either your DVD players' laser pickup unit or its strip wire has got damaged. Laser pickup unit is one which reads the disc we put into it, and strip wire is one which connected between the main circuit board and laser pickup unit assembly. The strip wire damage is common for all cd players, and dvd players. Just replace the strip wire with a new one of same type; and see the effect. If it helps you it is OK. If not, replace the laser pickup unit assembly with same type and number.
If you wants anymore assistance, feel free to contact me by Fixya. OK.

I ahve same problem with my Coby tfdvd3297..I found that code 11265 works to comtroll t.v. (volume& power) but have not found a code to cotrollbuilt in DVD player..hope it works for you.

Dear bless4lif,
Please expalin your problem,i will definitely help you.
Waiting for your reply.


Chandrashekhar

This COBY only has an analog tuner. Thus unless you are close to one of the remaining low-power stations, you need a digital-to-analog converter for OTA TV signals. For digital TV, you should use antennaweb.org or tvfool.com to identify the antenna and direction for the digital signals that you may be able to receive. Antennaweb assumes an outdoor antenna is conservative in the channel list it provides. Digital signal is either enough to register with the tuner or No Signal. An amplifier may be needed is the signal is split to several TVs.

If you have cable, check the type of signal coming in to the TV. If the signal has been switched to digital, you need a set top box.

I hope this helps.

Cindy Wells

Need a new TV. Sorry.

how long has it been since you cleaned the DVD tray? you need to clean after about 10hrs. of play time on a DVD player, just buy a simple cleaning disc at the store, a Walmart, K-mart, Target,....etc....and run it through your player, just follow instructions on package.......I had this problem with my kids ps2, works fine now, the discs you rent are very dirty, and in turn leave your player dirty...hope this helps.....

Go in the menu, and do the setup process of auto searching the channel. The tv gotta ''autodetect'' working channel and there is a small procedure that differ a bit from a model to another, usually pretty easy to get in...

capacitors problem in power supply .

There is support for tfdvd7008 on this site of COBY:
http://www.cobyusa.com/?p=doc
For all available downloads select:
MP3 & Portable > Portable DVD Players > TFDVD7008

The link to the manual in pdf format is:
http://www.cobyusa.com/files/manuals/TFDVD7008_MN.pdf

these codes are top secret,not given to the public.call a tech.

Yes, you will need to connect to antenna.

dl.owneriq.net/e/e8001e0f-a5e7-cbb4-ad73-fedb1d99f350.pdf check this site and u ll get the manual

of course!, as long as it has some way of connecting it!, via the antenna input or video in (yellow/red/white)