20 Most Recent Optoma PK301 PICO Pocket Projector Projector Lamp Questions & Answers

1,white spots appeared on screen,means the DMD chip is broken,you need a new DMD chip.I supply the DMD chip and the price is USD200 any questions, feel free to contact me We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. have a nice day! Jerry,Lampdeng Limited

it is not correlated with bulb 1,the color starts to go out, it become the white and black,the color is disappear. 2,then,the projector running off after only a few minutes, it is a general issue:the inductor need to be cleaned Use a cotton swab moistened with alcohol to clean the inductor. the inductor (Sensing element),is near to the Color Wheel. the industor : is a black little element,as little as 3 sesame seeds We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. any questions, feel free to contact me have a nice day! Jerry,Lampdeng Limited

Hi there:You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time. Hopefully one of other experts will be able to provide you with a real solution. Thank you for using FixYa

Did you let the projector sit with that slide on for a while? If so, what you have is called burn-in and it is when the image gets kinda locked into the LCD, and it will show up as the LCD get warmer. If you still have a warranty, I would return it for a new one, and make sure that the images used on it don't remain fixed for a long period of time. Hope this helps!

Question edited for full 'make model (what it is)', optima to Optoma Question moved from Televisions category. You can only change the password if you know the old one. They are password locked to prevent theft. Any on the secondhand market are stolen from workplaces.

manual-optoma-ds316l-en-51.pdf - Beamer-Parts.eu

https://www.beamer-parts.eu > files > desc > manu... PDF Enter new password again and press ". " to confirm. If you have forgotten your password, please contact your local office for support. ? Pass ...

To perform a hard reset on an Optoma UHD55 projector, you will need to locate the reset button on the projector. This button is typically located on the back of the projector, near the power cord. Press and hold the reset button for at least 10 seconds, or until you see the projector's LED light begin to blink. Release the button and the projector will reset to its default settings.

Hi, please check the serial number of the fans that are supposed to be the same. They might be different in some way because otherwise, the error should not have occurred. If the products have the same serial number or similar type of id, then I would take the projector to geeksquad/bestbuy to double check that the new fan was installed properly. Thank you.