MFJ 854 RF Current meter, 30mA-3A - Page 5 - Answered Questions & Fixed issues

Between the set screw and the bit. Use pliers to unscrew. U may need to hold the bit so it does not burn at the same time. Just like a drill :)

Need more details as to whats not working.

Here is a video.

http://www.youtube.com/watch?v=wWTA72ZsJsE

http://www.tooled-up.com/product/aeg-bl9618-9.6v-to-18v-fast-cordless-battery-charger/172801/

try some mineral oil.

It could be a bearing and you may get by with taking it apart and putting a little white grease in the bearing.

Watch this video.

http://www.youtube.com/watch?v=74-GeS-Pjo4

either a half inch or seven sixteenth allen head socket should work just fine to remove the caliper retainer bolts

theyre pretty much the same thing, but a scratch awl is better for going with the grain of the wood, and a marking knife is usually used to go against the grain

these days pretty much all products are non-toxic for that very reason. check on the package to make sure, if it says non-toxic its not a problem

im not exactly sure, but at least over 50 kg (110 lbs). they have to be heavy enough to not move when a car goes over them

google that same question and you should be able to download it.

This isnt for IQ testing.....

Start where your pretty sure wall is hollow. Hold button and slowly slide side to side. When all lights light make pencil mark then start about eight inches away in same direction slide back toward pencil line and when all lights light make another pecil line the center of the two is the center of the stud.

Generally lights stop blinking when charged but not sure on Kawasaki. If that was a comment against ryobi its not the top of the line but it will drill circles around a Kawasaki. Kawasaki great if it takes gasoline. Cordless tools not so good..

Buy a new one. Panasonic does not make good cordless tools and if you got over a year out of it feel lucky. Not being sarcastic at all. The batterys go and there not worth replaceing.. Ken

Im from the U.S. and never heard of that brand even ?? But generally a 5 year old cordless drill is basickly disposable. The batterys packs back then were NiCad and now there lithium ion. Huge improvementshould definetly look it up. But even without that little fact for the cost of a replacement battery you can find a new drill with two new batteries that are much better..

Whats the problem ?? Ken

The jt 21 is that little red one, I have one in my shooting box, only takes the jt staples, and operates just like any staple gun. Feed it from the back.

go to blackanddecker.com and in the header area towards the right is an icon for registering tools. If you still have a problem let me know and I will find another way into their site.