20 Most Recent
Sharp UX B700 Plain Paper Inkjet Fax - Page 5 Questions & Answers
Fax sent is blacck
your CIS or scanner is faulty
this unit is the one that reads your original document that you are sending.
It will probably need to be replaced
Manual for SHARP UX-B700
CLICK HERE for access to a PDF version of your manual.
Thanks for using FixYa - a VERY HELPFUL rating is appreciated for answering your FREE question.
Eliminate the transaction report
To eliminate the transaction report, perform the following:
- Press Function button once
- Press down arrow 3 times
- Press right arrow > once
- Press 5 "Never Print"
- Press "STOP"
This will eliminate ALL transaction reports. There are 5 options for this function.
- Always Print
- Error/Memory Print (memory errors only)
- Send Only (prints only on sent fax)
- Error Only (prints only when there's an error encountered)
- Never Print (eliminates all transaction report printing)
This should solve your problem. Please post back with any questions and/or to rate this solution. Thank you very much.
Greg
Need a fax number to confirm fax is b eing sent
-
Test your HP Fax to make sure it is set up properly for faxing.
-
Place a document in the document feeder and dial 1-888 HP FAX ME (1-888-473-2963).
-
Press Start/Enter .
-
Wait approximately 1 minute and you will receive a “Fax Back System Test” page, confirming your product is working correctly.
NOTE:
The Fax Header must be set up to test the fax machine.
I cannot receive faxes, but can send them.
Courtesy www.brokenfax.com :
Sharp ram clear (most models with LCD displays)
Press function 9 * 8 # 7 then # or * until display reads memory clear, then press start. Best of luck and hope this solves your problem.
Greg
When i insert pen drive in system system becomes
first insert your pendrive.Now right click on my computer.Go to manage option . select disk management. From that you must select your drive letter for your pen drive.Go to Action menu near to File menu.Fromthat select all tasks and select formatting.Then again goto all tasks and select change drive letter and paths.select the drive letter and your problem is solved. thanks for asking your problem.
Cannot receive faxes
Hello, my name is Curtis, and I am a Customer Service Rep. for Sharp Electronics. If you cannot receive faxes from multiple machines than you might want to check to make sure you machine is first set to fax mode, also check to make sure than the phone service for the machine is analog and not digital. The machine will not work well with digital service. You could attemp a work area reset on the machine, the procedure for doing so is to First take out all the paper, Second unplug the main power cord, not the phone line. And Last after about 30 seconds to press and hold down the start and stop keys while plugging the machine back in. Once it turns back on you can replace the paper. If there is still a problem please contact Sharp at 1-800-237-4277.
Sharp UX-117 display Wait a moment on power on and then no signal
I have not worked on a sharp ux-117 before, however most sharp fax machines are all alike when it comes to resetting this code. Turn the fax on while holding down the stop and start key don't let go until you see 1 =yes, 2=no for memory clear. press 1=yes. Some of the sharp fax machines have a small white rounded reset button. No guarantee but you have nothing to lose.
We have a Sharp UX-B700. Unable to send clear faxes.
The scanner that scans the paper is likely dirty. Pull the cover with all the buttons toward you, and clean the glass that the paper slides by, preferably with a soft cotton cloth and some rubbing alcohol. Try to make a copy to see if the quality is improved
My fax machine says printer error,add paper.
well,
your phone providing will not cause this problem, what will is either a paper is jammed in your machine or a paper sensor is either blocked by something or defective. look carefully inside where the paper travels through the machine.
if you have any more questions and still can't resolve it. contact me again for a more thorough diagnosis.
Thank You,
Mikey
Forgot how to send a Fax
Place your document(s) face down in the feeder, dial number, and press "start". That's it.
*Please rate me
Not finding what you are looking for?