20 Most Recent Hitachi 43FDX01B TV - Page 2 Questions & Answers

When the red light is on you have power to your tv.Then you must turn it on by the TVs remote NOT by pressing the power button on the TV.

Send your email address to me, and get back a copy of the service manual by return mail.

The convergence board is on the fritz! See TVRepairKits.com and see if they have a kit just right for you!

I believe what you have is a convergence problem and it is usually caused by two Integrated Circuits going bad which also opens up one or two resistors associated with them. Replacing the Convergence Ic'S - (Ik04 & Ik05) and Resistor Rk62 a 1.8 Ohm .5w. Metal Film type should take care of the problem. As far as costs involved, I would guess about $350-$425 to get repaired. With it only being about 4 years old, it should have that many more years left of good use for you.

2.2 is red,red and 1.5 brown, green---no polarity.if you did not change the chips or poor soldering,,,,,,,,

One color missing screen is the fault to your TV. This fault and rectification method are described in detail in the site given here. Visit this site.

For more details type in this site name "Electro-help" (DO NOT copy and paste the site name from here. It may lead you to wrong place) to search box of your search engine [not in the address bar of your browser], and press "Enter". It is an electronic equipments service help site.

Note the position of hyphen in between words in site name. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.

Pull up older posts.

You can locate this site, either at the bottom part of first search page, or at the top of second. Detailed descriptions are there to help you.

HelloGet into this site for details.http://www.google.co.in/imgres?q=hitachi+42v525&hl=en&biw=1024&bih=600&gbv=2&tbm=isch&tbnid=iMA93qqWm-WFbM:&imgrefurl=http://www.avchannel.eu/Rear-Projection-Bulbs/Rear-Bulb-HITACHI-42V525.html&docid=e6jW2NEtURYsSM&itg=1&imgurl=http://www.avchannel.eu/out/pictures/z1/rear-bulb-hitachi-42v525-15072-1.jpg&w=450&h=450&ei=wKV5T6_cGI_rrQeTn7yPDQ&zoom=1&iact=hc&vpx=86&vpy=181&dur=2454&hovh=225&hovw=225&tx=114&ty=133&sig=103950080994352537259&page=1&tbnh=114&tbnw=121&start=0&ndsp=21&ved=1t:429,r:0,s:0

Classic description of a convergence problem--see attached photoSet will need both chips for convergence changed---can be a do it yourself repair but involves soldering and part cost is under twenty dollars.Let me know if you have questions

Sounds like you have a short in your soldering. If you need tips on how to do this model or soldering goto www.TvRepairKits.com - look on their tips page

Since you have a picture for 10 to 25 min., we know that nothing is directly shorted. Look for bad connections in power supply and horizontal circuit or possibly bad capacitors in power supply.

Go to the menu, go to where closed caption is, and turn off text.

Go to the front where the speakers are and pull off panel, there will be a panel with some screws on it, Take it off, you will see your focus block. Top is g2 (screen) they will be marked bgr. B is on the top left, turn it counter clockwise.

Yes, and also check all low value resistors in convergence circuit.

No. If you have video then the crt's are fine. Bad convergence ic's. Can buy kits online.

Bad connection on 200v video line and flyback transformer.

Bad convergence ic's. STK392-110 an open 2.2 or 3.3 ohm resistors.

Bad convergence ic's. STK392110 an open 2.2 ohm resistors.