Top 20
Canon FAX-L800 Plain Paper Laser - Page 7 Questions & Answers
Ir 2204L error code E261-0000 how to solve it
El c?digo de error E261-0000 en la impresora Canon imageRUNNER 2204L se produce cuando se detecta un error en la se?al cero-cruz de la fuente de alimentaci?n durante la inicializaci?n. La soluci?n a este problema es reemplazar el PCB de la fuente de alimentaci?n y el PCB del controlador DC. Tambi?n es importante verificar el termistor principal TH1 para asegurarse de que tenga un buen contacto y que no est? abierto. Si todav?a no se resuelve el problema, podr?a ser necesario reemplazar el interruptor t?rmico.
Canon IR 2425 poor printing quality
Parece que el problema podr?a estar relacionado con el t?ner. Compruebe si el cartucho de t?ner est? lleno. Si no es as?, reempl?celo con un cartucho de t?ner nuevo. Adem?s, es posible que desee ajustar la configuraci?n de densidad de t?ner en el controlador de impresora a una configuraci?n m?s oscura. Para obtener m?s informaci?n, consulte el manual del usuario o p?ngase en contacto con el fabricante.
How to solve error E355-0005 ON CANON 2026N ?
Error E355-0005 on a Canon imageRUNNER ADVANCE 2026N is related to the printer's hard disk drive (HDD) and can be caused by several issues.
- Perform a hard reset: Turn off the printer and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on.
- Run a HDD check: Go to the service mode and run a HDD check from the device status menu. The printer will scan and check for any errors on the HDD, and if it finds any, it will try to repair them.
- Format the HDD: If a HDD check does not resolve the issue, you can try formatting the HDD. This will erase all data on the HDD, so make sure to backup any important data before proceeding.
- Replace the HDD: If the above steps do not resolve the issue, the HDD may be faulty and will need to be replaced. This should be done by a professional technician.
- Check the firmware: Ensure that you have the latest firmware version installed, outdated firmware can cause issues with the printer's performance.
Canon ir 4570 error code 744-3030 What Can I do
Error code 744-3030 on a Canon IR 4570 indicates a problem with the toner hopper. Here are some steps you can take to try to resolve the issue:
- Turn off the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
- Check the toner: Open the toner hopper and check to make sure there is toner inside. If the toner is low, refill it.
- Check the toner hopper motor: The toner hopper motor may be malfunctioning, causing the error code. Check the motor to see if it is working properly. If it is not, it may need to be replaced.
- Check the toner hopper sensor: The toner hopper sensor may be dirty or malfunctioning, causing the error code. Clean the sensor and make sure it is working properly. If it is not, it may need to be replaced.
- Reset the printer: Reset the printer to clear any error codes. To do this, turn off the printer, press and hold the "1" and "9" buttons, and turn the printer back on. Release the buttons when the display shows "Initializing."
If the above steps do not resolve the issue, it may be necessary to contact a professional technician or Canon support for further assistance. They can help diagnose and fix the problem safely and effectively
Canon ir2520 jamming in the exit tray
If your Canon IR2520 is jamming in the exit tray after initializing the machine, it could be caused by a few different issues:
- Paper tray: Make sure that the paper tray is loaded correctly and that the paper is not jammed or loaded incorrectly. Also, check if the paper tray is not overfilled or if the paper is not wrinkled.
- Pick-up roller: The pick-up roller is responsible for picking up paper from the tray and feed it to the printer. Check if it is dirty or worn out.
- Exit guide: The exit guide is responsible for directing the paper out of the machine. Make sure that it is not blocked or bent, which could cause the paper to jam.
- Fuser: The fuser unit could be malfunctioning. The fuser is responsible for heating and fusing the toner to the paper. If it is not working properly, it could cause paper jams.
- Feed rollers: The feed rollers are responsible for feeding the paper through the printer. Check if they are dirty or worn out.
- Paper jam sensor: The paper jam sensor may be malfunctioning. If the sensor is not working correctly, it may not detect a jam and the printer will continue to try to feed paper through.
- It is recommended to check the copier's manual or consult with the manufacturer's technical support to troubleshoot the problem. They may provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.
These are general suggestions and your specific case may require different actions.
Regenerate response
Canon printing calculator will not advance paper.
If your Canon printing calculator is not advancing paper, there are a few potential causes for this problem:
- The calculator may be out of ink or ribbon. Check the ink or ribbon and replace it if necessary.
- The calculator's print head may be dirty or clogged. Clean the print head to remove any debris that may be blocking the paper from advancing.
- The calculator's paper feed mechanism may be damaged or stuck. Check the paper feed mechanism and make sure it is functioning properly and not stuck.
- The calculator's gears or other internal components may be worn or damaged. If the problem persists, you may need to have the calculator serviced by a qualified technician.
If you are unsure how to check for and address these potential causes, you may want to consult the user manual for your Canon printing calculator or contact the manufacturer for assistance.
Canon ir3300 pc to print in xerox print processing but not pr
If you are experiencing issues with your Canon IR3300 printer when trying to print in Xerox print processing mode, but it's working fine in regular print mode, there could be a few possible causes. Here are a few things you can check:
- Check the printer driver: Make sure that the correct printer driver is installed and that it is compatible with the Xerox print processing software. If the driver is not compatible, the printer may not function properly in Xerox print processing mode.
- Check the network connection: Make sure that the printer is properly connected to the network and that it can communicate with the Xerox print processing software.
- Check the print settings: Make sure that the print settings are correctly configured for Xerox print processing mode. This includes the resolution, color mode, paper size, etc.
- Check the Xerox software: Make sure that the Xerox software is compatible with your computer's operating system and that it is properly installed and configured.
- Check the firmware: check if your printer's firmware is up to date.
- Check the paper size and tray: Make sure that the paper size and tray are correctly configured for Xerox print processing mode.
I have a new Canon printer and the scanner cover won't go down. Does the printer need to be turned on?
or most Canon printers, including the Canon Pixma TR 8620, the scanner cover does not need to be closed for the printer to function properly. However, to use the scanner or copy functions, the scanner cover must be closed.
It is possible that the scanner cover is not locked in place properly, or that there is an obstruction preventing the cover from closing. You can try the following steps to fix the issue:
- Make sure the scanner cover is properly aligned and locked in place.
- Make sure there is no debris or foreign objects inside the scanner bed or on the scanner cover.
- Make sure the printer is turned on and that the scanner is properly connected to your computer or device.
- Check the printer's manual or the support page on Canon's website to see if there is any troubleshooting or instructions specific to your printer model.
If the problem persists, it may be a mechanical issue with the scanner cover or the printer itself, and it may require service from a qualified technician.
How to clean print head on canon ip1300
To remove and clean the printhead on your Canon IP1300 printer, follow these steps:
- Turn off the printer and unplug it from the power outlet.
- Open the printer cover and raise the printhead lock lever.
- Lift the printhead out of the printer.
- Moisten a cotton swab with warm water and gently clean the printhead nozzles. Be sure not to touch the gold-colored electrical contacts.
- If the printhead nozzles are heavily clogged, you may need to soak the printhead in a solution of warm water and a mild cleaning agent for a few hours. Be sure to follow the manufacturer's instructions for the cleaning solution.
- After cleaning the printhead, shake it gently to remove any excess water, and then let it dry for a few hours.
- Once the printhead is dry, replace it in the printer and lower the printhead lock lever.
- Close the printer cover and plug the printer back in.
- Turn the printer on and perform a printhead alignment to ensure that the printhead is properly aligned.
If you are unable to clean the printhead or if the problem persists after cleaning, it may be necessary to replace the printhead. A new printhead can be purchased from the manufacturer or an authorized dealer.
My canon pixma printer, scanner cover is stuck?
If the scanner cover on your Canon Pixma printer is stuck, there are a few things you can try to fix it.
- Check for any debris or foreign objects that may be preventing the cover from opening. If you find any, carefully remove them.
- Try gently pushing or pulling the cover to see if it will move. Do not use excessive force as this can cause damage to the printer.
- Check the user manual for any troubleshooting steps or specific instructions for opening the scanner cover.
- If none of the above steps work, you may need to contact Canon customer support for further assistance or take the printer to a professional repair technician.
Please make sure to turn off the printer and unplug it before attempting any troubleshooting steps.
Iowa State canon TR 4520 I cannot get come on how can I fix it
The best way to reset your Canon printer is to find and hold the reset button on your printer. This usually consists of a small pinhole or recessed button located on the back or side of the printer, depending on the model. Press and hold the button for a few seconds until the printer resets itself.
Not finding what you are looking for?