Questions & Answers
My fax model is L-800,
Have you tested the telephone line to see if it has dial tone. Unplug the fax from the line and plug in a analogue phone to test this.While you are there check the extension number with the phone to make sure you are still on the same number. You can do this by dialing any phone with a display ie a mobile.
68 views | 0 helpful votes
Change incoming fax number
Unless I'm misunderstanding your question, your fax machine has nothing to do with the incoming fax number. That's assigned by your phone service provider to the telephone line the fax machine is connected to. The only way to change that number would be connect the machine to a different phone line. This might be as simple as just plugging the phone cord into another jack if that line already appears at a convenient location, or it might mean a visit from a technician to place a jack where it's needed. Or you can contact your phone service provider about assigning a new number.
I hope this has helped. If not, please post a comment with more information about your question and I'll try to help further.
66 views | 0 helpful votes
Copies made are totally black. what do i do?
Please check your Printer setup. or options ( I am not familiar with this printer. what terms they use- I'm not sure) Ther will be options for Print in Color or Black. Make sure the radio button for COLOR is checked. This way, black and color both will print in the correct color. So leave it on color even when you want to print in Black. The black radio button is there for a different reason.
Hope this will help you.
411 views | 0 helpful votes
Canon FAX-L800 showing "replace cartridge"
You can set the unit to transfer the documents on to another fax. This is quite a longwinded process so I have included a link to the manual for this model as you will need to study this before you can achieve the transfer and my post would be running into several pages otherwise.
The link is here and the section you need to look at begins at page 141 on chapter 7-11
I realise you need to get these faxes out urgently so I am rushing my answer a bit!
In regards to the problem with the replace cartridge - I would recommend that when you get your faxes through you disconnect the machine from its power supply for 30 minutes then power up again to see if the issue resolves.
If not it is possible that the cartridge itself is faulty.
I hope this helps. Please do rate my answer. Many Thanks.
38 views | 1 helpful votes
How to reset date&time ?
Open the covers off the one touch speed dials.Press the Dataregestration button,dataregistration will be displayed on the screen.press set,user settings will be displayed.press set again,date and time settings will be displayed.press set again.change the date and time and press set.
98 views | 4 helpful votes
There is a cable that runs from the scanner to the processor. Looking
from the front, its on the left side of the machine, on the back, it is
a fairly large connector.
Unscrew the two thumb screws, then
unplug it and plug it back in with the machine ON.
It will force it
into a reset and may boot.
The problem is caused by a software glitch .
Check the tray settings and ensure that paper size guides are
set to the appropriate paper size, then power off/power on the machine.
385 views | 0 helpful votes
the problem is the fax that are stored in memory you will lose anyway.
you will need to do the following to get rid of your error:
DATA REGISTRATION button,
and # button, on the operation panel
go down to number 8
then scroll round to ALL
and then restart the machine and the fault should go.
Hope this helps
141 views | 0 helpful votes
Solution for L800 memory full
Open one touch cover press "Data Registration"
Arrow to "TX Settings"
Arrow to "Erase Failed TX"
Arrow to "On"
Then press the Orange stop key.
The Great Gordini
197 views | 0 helpful votes
Clearing memory on fax
Solutiuon at hand
Open one touch covers, press "Data Registration" press "Set" arrow to "TX Settings" Press "Set" arrow to "Erase Failed Tx" Press "Set" arrow to "On" Press "Set"
The Great Gordini
154 views | 0 helpful votes
Not finding what you are looking for?