Top 20
Canon imageRUNNER 8500 Copier Questions & Answers
How to fix Error Code E000732-001
Check the connection from Fiery to reader controller PCB, located on the left side of the machine, just beside the TCP /IP port connection.
7/7/2014 7:26:30 PM •
Canon...
•
126 views • 0 helpful votes
E0061 canon 1100
Primary charge failure .broken wire or not seated or arching to the grid.
6/4/2014 12:27:14 AM •
Canon...
•
54 views • 0 helpful votes
E315-000d how to solved
a fault is detected when encoding image data,
1.A chip failure is found in writing/reading/verifying the image data by using the register of encoding chip.
2.an error occurs when encoding image data
4/2/2014 1:46:11 PM •
Canon...
•
208 views • 0 helpful votes
E000100 0000
OK, but first try to clear the error under service mode, then replace fixing film assy, for EU 240V is FG6-6041.
To clear the error:
* 2 8 *
COPIER
FUNCTION
CLEAR
ERR
OK
Turn off and on ( main switch )
In case You Need Online Assistance Then follow Us For ON:
Canon Printer Support
2/7/2014 7:37:59 PM •
Canon...
•
170 views • 1 helpful votes
Where is laser shutter in ir 6000
Open the from door ....
see the top (center) side of the door there is a lever which push the laser shutter when u close the front door..
it may have break
12/17/2013 11:48:55 AM •
Canon...
•
127 views • 1 helpful votes
SHARP AR5618 COPIER ERROR CODE F2 64
You might Google the printer name and the error code. This is just a shot in the dark, but if there is no "reset" button, you might try unplugging it for a couple of minutes and it should reset itself to factory default settings. You will loose any settings and any work in progress. Just a guess. If you have an owners manual, I would check there to find how to solve the problem. There is normally a section that defines the error codes and gives solutions. You also might want to enter the "menu" if there is one, and discover whether you can solve the problem there. If you don't have an owner's manual, you might be able to find one at the printer manufacturer's website in the support section. Good luck.
11/11/2013 11:10:38 AM •
Canon...
•
87 views • 0 helpful votes
ERROR CODE 000005-0010
The error code E00005 means that the fuser cleaning web needs to be replaced and the web counter needs to be rest.
2/25/2013 6:02:34 AM •
Canon...
•
149 views • 0 helpful votes
Ir 85 error code E000015-0000
hello
8500 IR copy machine
E00015 - 0000 errors.
Please guide me.
I also translated by the site you have to translate the sentences. So you have the goodness wording is easy.
Thanks
11/19/2012 7:31:23 PM •
Canon...
•
581 views • 0 helpful votes
E000532-8001
i just replace Stapler shift motor GEAR..its work!!
9/29/2012 7:29:27 PM •
Canon...
•
696 views • 0 helpful votes
Where can i find the serial number
You can find the serial # with pressing the meter counter, it should be on the bottom of the display or you can look on the back panel of the copier toward the bottom by the power cord. Good Luck
12/19/2012 11:20:49 PM •
Canon...
•
40 views • 0 helpful votes
Fuser upper roller problem
Apparently you just need the pressure roller, if noisy, you can change the bearing.Good luck ...
4/24/2012 8:44:26 PM •
Canon...
•
109 views • 0 helpful votes
Black line on copy
check the drum.If that is ok then there is some problem in charging .Also check the DP for any foreign particle as it creates a brush while copying .
4/20/2012 11:14:18 AM •
Canon...
•
43 views • 0 helpful votes
Error 510 canon ir 8500
The inlet motor (M1) is faulty. The finisher controller PCB is faulty.
12/26/2011 1:52:27 PM •
Canon...
•
175 views • 0 helpful votes
E350-3000 or e350-0002 this error
Hello,
under ir8500 I can't find the error 350, so exact solution It can't be recommended...
But generally error of 300 type are related to problems with dc controller pcb and only solution is to reconnect the connectors or replace dc controller ( main pcb ).
9/15/2011 11:38:05 AM •
Canon...
•
1,705 views • 0 helpful votes
Error E354-0002 ir 8500
Error E354 in Canon iR 2016error e354 code appear when you replace PCB controller board.Please note. Before replace your PCB board with other one.Pull out a small (FRAM COUNTER) chip from your old PCB board you can found it right side of the PCB board near a battery cell the chip attached with screw open screw and pull it out and attached it with your new PCB board .install your PCB board in the machine and turn on power error e354 will go off.
8/27/2011 7:49:15 PM •
Canon...
•
2,340 views • 0 helpful votes
How can i solve error
The main reason for the error code is an incorrect toner cartridge being used in the copier. You can turn the copier off, but it will not flush from memory. in order to correct the issue perform the following:
1. Turn the printer off
2. Remove the incorrect toner cartridge
2. Unplug the power cable from the wall outlet.
4. Plug the Printer back on
5 Turn the printer back on
You will see the message change to another message requesting to insert the toner cartridge.
6. Insert the old or new correct toner cartridge into the copier.
If this resolves the problem good else you will have to replce the carrtridge.
9/11/2011 6:08:27 AM •
Canon...
•
840 views • 0 helpful votes
Error E602 - 0003
make hard disk check and clear to every stage from 1 to 4and turn off and then on the machine
11/17/2011 4:27:56 PM •
Canon...
•
124 views • 3 helpful votes
My canon ir 3045
have u checked the lower pressure roller .sometimes it also causes the damage to fixing film. also check the element as it may not be properly seated .
9/24/2011 12:07:28 PM •
Canon...
•
546 views • 0 helpful votes
Not finding what you are looking for?