20 Most Recent
Canon imageRUNNER 8500 Copier - Page 5 Questions & Answers
ERROR IN IR 8500
eo 732 is a reader board error or a bad or missing connector from the scanner to the machine looks like a parrallel connector
10/2/2012 4:37:18 PM •
Canon...
•
Answered
on Oct 02, 2012
Image runner 2200
E000202-0001
E000007-0000
A E000007 means the fuser film can not find the HP > basicly you need a new fuser or a fuser film. A E000202 means that you need a new scanning lamp & regulator PCB.... Good Luck
9/15/2012 5:18:39 AM •
Canon...
•
Answered
on Sep 15, 2012
E602 0001 - ir8500 Canon
Turn machine on while honding down the 1 and 9 keys.Machine will run a hardrive check program that takes 20-30 min.Power cyle main power in about an hour.If this dosn`t work system software and or new hardrive.$$$$$
9/3/2012 6:27:53 PM •
Canon...
•
Answered
on Sep 03, 2012
Canon Error Eoo7
This error code indicates to the copier that the upper fixing film on the fuser assy is not rotating. Paper wrapped around the fixing film or the film itself is damaged may cause this. Unless you are very mechanically inclined , it will take the removal of the fixing assy and possibly the replacing of the fixing film assy. A tech would need to be called in to correct the problem. The fixing film is a replaceable item. Good luck.
5/31/2012 1:42:59 PM •
Canon...
•
Answered
on May 31, 2012
Fuser upper roller problem
Apparently you just need the pressure roller, if noisy, you can change the bearing.Good luck ...
4/25/2012 9:46:12 PM •
Canon...
•
Answered
on Apr 25, 2012
Black line on copy
check the drum.If that is ok then there is some problem in charging .Also check the DP for any foreign particle as it creates a brush while copying .
4/20/2012 5:04:40 PM •
Canon...
•
Answered
on Apr 20, 2012
Not finding what you are looking for?