Top 20 Casio Triple Sensor Pathfinder PRG60-1AV Wrist Watch Questions & Answers

may be some dust inserted into the watch which prevents you to press the buttons .another prob might be low battery. put your watch in sun in order to give some power to your solar battery

hi i have prg-505t . i want reset factory .....??

probably one of the buttons of your watch is stuck that's why you cannot use the other buttons of your watch. it has to be opened and check for it, mostly of the button that are stucked with this kind of watch is the illuminator or the light located at the lower middle of your watch. i hope i had helped you.

so here is the fix if you get op en display on your casio pathfinder or whatever model. mine happens to be a paw 1200t1. you gotta break it open 2 pins each side band comes off.2. pry off the side pieces. this exposes 4 screws.3. the base then comes off be careful of the gasket. 4. once inside. notice a round circular object on the base and a small oval shiny gold copper piece. 5. For whatever reason the shiny copper piece has shifted and does not make contact with the tiny little springs there are 2 if you shift the base to make contact with the gold piece the op en goes away and watch is back to normal. 6. the fix is move this little piece back to where it belongs. i got lucky and the glue still held when i firmly moved it to its original location. super glue came to mind if it wont stay where it belongs.7. gasket orientation and cleaning out the gasket channel is a given i used welding tip cleaners to do the intricate work. under the bands are very grungy. mine is about 5-6 years old. reassemble the way it came out. if your battery is good and you get this op en look to your display for whatever reason this worked for me and if casio uses this as a warranty or warning of water coming in your watch it was a STUPID DUMB IDEA. those springs should be solid state and the watch is useless until it is fixed no light, no baro, no alt, no comp. notta and no buttons work. there is no reason whatsoever that this shiny copper thing shifts but it happened to me and my watch is working and my battery has had H or full power since day one.

Hi,
1-goto this link http://world.casio.com/wat/download/en/manual/
2-follow the instructions and download the user's manual for your watch

you should be able to get instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

The open code is saying that your case isn't closed properly. Without seeing it, it's hard to tell if you opened/closed the case correctly. If you believe it is closed properly, look in your user manual and see if there is a master reset button and try that. Did you change the battery yourself or did you have a jeweler do it?

I know the secret behind CASIO's "OPEN" problem. This is not a joke. You'll be happy to get your watch working again. Because the procedure is too long to fit in here, send me an e-mail at [email protected] and I'll send you the solution. This is no scam.

If you use the backlight of the alarm a number of times during a short period, RECOV appears on the display. After some time, battery power will recover and RECOV will disappear, indicating that the above functions are enable again.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all CASIO watch manuals.Rate me, please

If you haven't got instructions on how to do this, you can get
instructions from the Casio web site.

Go to the casio web site "casio.com".

Select "support" and the "manuals",
watches;

Accept terms

Select "watch manual archive"

Read the number of the back of your watch and enter it into the search box

If you left your watch in direct sunlight, there should be just 6-8 hours enough to recharge it. If there was no direct sunlight, it may take up to a week to revoke your watch. This corresponds only to watches powered by light. The energy cell in those watches is called capacitor, not battery. If you are not sure what type of cell your watch has, leave it for a few days more in bright lightened place and then see if it works. If it does not - replace the capacitor (or battery if your watch isn't powered by light). Rate me, plz.

These small clips are just hooked around small prongs. You need a VERY small screwdriver (now that i think about it, a needle may work). Just pry the looped ends up and lift gently. I have done this a couple of times, however when I replace my batteries nothing happens. Last time I had to send it back - some info stated there was another battery deeper????? That is why I am looking into this now.
RDF

you can find an exper in the local shop where you buy the product and they will give you specific service for your questions about your product.

In addition, i like to play world of warcraft. there is a reliable website for

all players to get buy wow gold with the lowest price wihit in 10 minutes' fast delivery and you also can enjoy first class service

for your login.

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

The battery is CTL 1616 and I had the same occurance when I opened up my model Casio model 3043. I needed to use the battery to test my model 2767 and find out if a new battery would bring it back to life (yes, it still lives). After replacing the battey back into my 3043, I jumped the (ac) to (-) and at first the watch would indicate all was well but then it would revert back to "open". I tried over and over to try and get the "open" display to clear but I was not successful. I then thought to go ahead and replace the back on the case to see if the three contact springs would change the display and sure enough, "open" no longer was in the display. The watch works perfectly as before. As for the 2767, as soon as I jumped the (ac) to (-) the "open" display went away. There is only one spring contact to the back case on the 2767 model. Unfortunately I do have an extra spring that fell out when I opened it up and I have no clue as to where it goes. I have not found anyone who can help me on the location for the shorter spring. Any advice would be most helpful.

I found one of these on ebay. Here's the item I ordered.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310129530689

I used the instructions here to replace the battery myself:

http://forums.watchuseek.com/showthread.php?p=226461#post226461

Hope this helps.

Follow this link and download manual:

http://world.casio.com/wat/download/en/manual/

Rate me, please.

Do not lay the tweezers across any contacts as you may damage the watch.
First you need to examine your watch movement and find an AC point (contact). It is embedded on movement. Use an eyeglass, as the writings can be very tiny.
When found, touch an AC point with one arm of tweezers and battery+ with another arm simultaneously.
Some watches needs to do that twice, so, to be sure, do that twice.
If you are not comfortable with tweezers, you can use a thin wire, connecting one end of the wire to AC point and another to battery+.
Each shortcut should last for 3 seconds.

Do not forget to rate, please.

I received a message from a member of the group suggesting a solution to the problem.  I followed his advice and the problem was solved.  My thanks to him and to the group for the assistance.
Now I need a manual for the Casio CBX-102.  This will be a gift to my grandson who is attending college and needs to understand how to use the Data Bank.   If anyone can suggest a source for the CBX-102 Data Bank watch I'd appreciate it.
Thanks to all,
Bill D