20 Most Recent
Bertini Chrome Stroller - Page 2 Questions & Answers
Need parts
Hi Diane
Please make contact direct with Dorel Australia -
Our stroller shakes when pushing
You don't mention what make / model you have. Try turning stroller upside down
( without baby in it *-) ) and spin each wheel to see if it runs freely. Try to rock the wheels from side to side to see if there is any play in the axel. On a flat smooth surface do all wheels touch the ground? If the front wheels swivel do they rotate freely without any side to side play? Some strollers have nuts you can adjust others just have Silver domes. Try tightening nuts till wheels get tight then back off just enough so they spin freely try taping domes on tighter using a large socket from a socket set and a hammer so the pressure is around the edge of the dome and not in the centre where it would dent. Silicon spray is the best lubricant for strollers.
On Saturday afternoon, I strapped
Hi.
The best thing to do is contacting Bertini. A part is probably slightly defective.
Bertini are manufactured in Australia. You need to contact the manufacturer directly, or the seller that originally distributed your pram.
Here the contact.
Bertini AU and NZRegards.
Problem with tires
Pick up a kit for bicycle repair. Take the wheel off, deflate, pull the wheel from the rim and remove the tube. Pump the tube up a little, place under water and look for the bubbles. Once you find the bubbles, patch with the bike tire repair kit, deflate, put the tube back in, reattach tire to rim and inflate.
Tyre not inflating
Any bike store or even walmart will carry the tube you need. I replaced all my tubes with thorn resistant ones and added thorn liners haven't got a flat since. Most bike stores will also change out the tubes for a couple of bucks.
Not finding what you are looking for?