Fisher Price Fisher-Price Fisher Smart Cycle Extreme - Answered Questions & Fixed issues

Clean the cartridge connection with Isopropyl alcohol. Also clean where the cartridge is inserted (an old toothbrush works the best). This corrected the issue for me.

I had a similar issue. My Smart Cycle worked for a while, then it progressively became more and more temperamental, failing at unusual times, not turning on consistently, then finally quit powering on entirely. Turns out there was dirt & grime (maybe a little corrosion) on the game cartridge and plug. The solution -- clean with Windex and q-tips.Here's the post that led me to that conclusion: http://www.fixya.com/support/t317354-smart_cycle_fisher_priceAnd more on cleaning the cartridges and console plugs in general:http://blog.pricecharting.com/2012/03/how-to-clean-video-games-consoles-with.html

Purchase on Ebayhttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150826868085#ht_500wt_1413

Get a female to male converter plug/cable and put it in between.

Here you go. The cord is the last item on the list. Hope it works out!

https://store.mattel.com/ProductParts.aspx?cat=139&sec=8713&productid=N9628&tx=103

Does it still have the green cord attached to the toy? It should plug right into your TV.

Hi lyndra. no problem. just go to this link http://www.fisher-price.com/fp.aspx?st=7350&e=product&pid=54412

then scroll down to the manual which you can download for free. Thanks for choosing Fixya!

Joe

How to assemble: Steps: Mechanism casing upside down: - insert man - insert on/off switch - insert small cover - insert small gear - insert H shaped part at the gear opening - align base and screws in w 2 screws Right side up: - attach big gear and axel to small gear inside casing - place scoring under axel and onto the base - align merri go round against mechanism and 2 screws Upside down: - screws 3 more screws of merry go round piece

sorry have no need to work on toys no small ones anymore

Check inside where the batteries are stored. There may be a switch that changes the language and it might have gotten jostled and switched on its own. If still no luck, remove and replace batteries to see if it resets. If that doesn't work contact Fisher Price customer service for more assistance. Bonne Chance! (That's Good Luck in French) If you haven't fixed your toy yet, you might already know that. =) Au Revoir

try to reset, insert small thin object with the batteries in and the product turned on. And check that batteries are both the same bransd and heading in the right direction and use the recommend type or brand if they have one.

Fisher Price Music box: to open, remove the four screws from the bottom, open the two parts as wide as possible without using too much force. Using a small flat blade screw driver, insert between the red cover and white top where the wind up knob is located. Pry the red bottom out far enough to allow the ring surrounding the knob to slide under the red bottom. The box is now open.

After repair, and re-assembling, make sure the wider part of the wind up stop wheel faces the front of the player, otherwise the wind up knob catches and slows the mechanism.

notify fisher price https://fisher-price.mattel.com/shop

As we can not fully see the damage my best bet would be to take it to a local "Mens Shed" where I'm sure they can fix it for you.

my grandsons broke their mother's (and aunts') FP music box. There was almost no sound The teeth are simply a wind-up music box set, connected to a rod that transmits the vibrations to the diaphragm under the pseudo-tone-arm. I was able to fix by placing a cotter-pin on the rod in the arm at or near the junction and then trim with wire cutters to the correct size. I checked the diaphragm first by tapping it through the arm/table connection.

Contact seller support

Try to put it new batteries. If not notify the person you bought it from or the store and ask for help or refund.

its broke buy a new one

Sorry we have no parts locator service here.

Has anyone been using anything beside the stylus your suppose to use? Cause that can damage the screen and make it not come on. Also i seen you said it won't recognize when hooking it up to computer. Make sure the program is installed on your computer and then unhook the cords from device and computer and reinsert them. Let me know what happens.