Braun IRT3020 Thermoscan Ear Thermometer - Page 9 - Answered Questions & Fixed issues
How do I accurately calibrate my digital scale that is a manlloro 200g made in China
To calibrate a digital scale, you will need to follow these steps:
- Find a weight that you know the exact weight of, such as a coin or a small weight. This weight will be used to calibrate the scale.
- Place the weight on the scale and wait for the scale to stabilize.
- Check the weight displayed on the scale. If it is not accurate, use the scale's calibration function to adjust the scale to the correct weight.
- To calibrate the scale using the calibration function, follow the instructions in the user manual for your specific scale. The process may vary depending on the make and model of the scale.
- Once the scale is calibrated, remove the weight and test the scale by weighing an object of known weight. If the scale displays the correct weight, the scale is properly calibrated. If the scale is still not accurate, you may need to repeat the calibration process or consult the user manual for further instructions.
I hope this helps! If you have any further questions, don't hesitate to ask.
1/8/2023 11:03:22 PM •
Home
•
Answered
on Jan 08, 2023
•
475 views
Are there any nursery rhymes music boxes?
have seen some nursery rhymes musical figurines http://www.themusicboxcompany.com/baby_children.htm#nurseryrhymes scroll down to nursery rhymes
1/6/2023 5:51:58 AM •
Home
•
Answered
on Jan 06, 2023
•
807 views
Weird issues with tankless water heater
It sounds like you are experiencing some unusual behavior with your tankless water heater. There could be a few different factors contributing to these issues.
One possibility is that the temperature sensing and control system on your tankless water heater is not working properly. This could be caused by a problem with the thermostat or other components of the temperature control system.
Another possibility is that there is an issue with the flow rate of the hot water being delivered to your shower. If the flow rate is too low, the water may not have enough time to heat up properly, resulting in cold water being mixed with hot water.
It's also possible that there is a problem with the plumbing in your house, such as a blockage or a leak, which is causing the water temperature to fluctuate.
To troubleshoot these issues, you may want to start by checking the thermostat and control system on your tankless water heater to make sure it is functioning properly. If the thermostat appears to be working correctly, you may want to try adjusting the flow rate of the hot water to see if that helps stabilize the water temperature. If these steps do not resolve the problem, it may be necessary to call a plumber to diagnose and fix the issue.
I hope this helps! If you have any further questions, don't hesitate to ask.
12/27/2022 4:29:02 PM •
Home
•
Answered
on Dec 27, 2022
•
43 views
Water dripping from the Shower Head of a Mira Elite QT when unit is off
It sounds like you may have a problem with the internal plumbing of your shower unit. The filter at the bottom of the unit may be clogged, or there may be a problem with the valve that controls the flow of water to the shower head.
To troubleshoot this issue, you could try the following steps:
- Check the filter at the bottom of the unit for any debris or clogs. If the filter is dirty, clean it out and see if that helps stop the dripping.
- If the filter is clean, try shutting off the water supply to the shower and then opening the valve that controls the flow of water to the shower head. This will allow any excess water to drain out of the unit.
- If the dripping persists after these steps, it may be necessary to call a plumber to diagnose and fix the problem. It's possible that there is a problem with the internal plumbing of the unit that will require professional repair.
I hope this helps! If you have any further questions, don't hesitate to ask.
12/27/2022 4:25:40 PM •
Home
•
Answered
on Dec 27, 2022
•
174 views
Can you solder the wires for a splice on a oven temperature sensor that has a melted connector?
Yes, it is possible to solder the wires for a splice on a oven temperature sensor that has a melted connector. Soldering is a common method for making electrical connections, and it can be used to repair a melted connector on a oven temperature sensor.
To solder the wires for a splice on a oven temperature sensor, you will need the following tools and materials:
- Soldering iron
- Solder wire
- Wire stripper
- Heat-shrink tubing (optional)
Here is a general outline of the process:
- Gather your tools and materials.
- Cut off the melted connector from the oven temperature sensor.
- Strip the insulation from the ends of the wires.
- Twist the wire strands together to create a solid connection.
- Heat the soldering iron and apply a small amount of solder to the wire connection.
- Allow the solder to cool, and then apply heat-shrink tubing over the connection (optional).
It is important to follow proper safety precautions when soldering, including wearing protective eyewear and working in a well-ventilated area. If you are not comfortable soldering the wires yourself, you may want to seek the assistance of a qualified technician or engineer.
12/27/2022 2:33:41 PM •
Home
•
Answered
on Dec 27, 2022
•
193 views
What do vessels oil do and how ?
The
oil vessels that you see in the harbor are specially built for carrying oil. They transport oil from one place to another. These are large ships that can carry large amounts of oil. They also have a lot of space for cargo. Oil vessels can run on steam engines or on diesel engines.
Oil and gas tankers are a type of vessel used to transport large quantities of oil and diluted molasses. They are used to transport oil and gas from one region to another.
Rus Marine Oil supplies premium quality Marine Lubrication Oil at a reasonable price in all ports of the Far East, southern Russia, and the Baltic states. Call us right now!
12/15/2022 10:26:28 AM •
Home
•
Answered
on Dec 15, 2022
•
15 views
How do I fix my ceiling lights?
You probably have a bad light switch. Could maybe be the bulb but with the flickering after you turn the switch off, the switch it is intermetinaly (sp) giving it power.
12/7/2022 11:30:13 PM •
Home
•
Answered
on Dec 07, 2022
•
43 views
Not finding what you are looking for?