Top 20
Coolit Systems CoolIT VAN-R120 Vantage A.L.C. CPU Fan, Noise Reducer, Cooling Fan, Radiator Questions & Answers
I have a 2000 cavalier my radiator cooling fan not
Hi.
Three things can cause this to happen.
Bad or corroded wires.
Faulty or damaged fan assembly.
Blown fuse between the fan and the power supply.
First, check over all the wires, make sure that they aren't damaged somehow.
Next, look over the fan itself, check to make sure that the fan hasn't been hit somehow, causing it to not work.
Next, check all the fuses, both the ones under the dash, as well as the ones under the hood on the fender.
Most people don't even realize that those other fuses are even there.
Also, check to see if there is an in-line fuse, or a fuse-able link that might be the cause of your fan not working.
I hope this helps steer you in the right direction, and good luck!
Onity machine error showing no valid data connect to pc , what can i do for that ...
Here are some steps you can take to troubleshoot and resolve the issue:
Connect the Machine to Your Computer:
First, ensure that your Onity key machine is properly connected to your computer. You can use either a USB or Ethernet connection, depending on your machine's configuration.
Be cautious not to damage any of the connections while setting up.
Launch the Access Control Software:
Once the machine is connected, launch the access control software provided by Onity.
Double-check that all the information (such as username and password) is correctly entered.
Select the "Reset" Option:
From the software's main menu, choose the "Reset" option.
You'll be prompted to enter an authorized user ID and password assigned to the machine's operator account.
After verifying these credentials, you can enter the reset mode.
Input New Credentials:
While in the reset mode, input new credentials for the machine.
Set a unique password and click "OK".
Remember this password, as you'll need it each time you use the key cutting device.
Confirm the Reset:
Confirm the reset by clicking "Yes" on the confirmation prompt.
Wait until the process completes successfully.
The machine will reboot automatically after a few seconds.
If you encounter any issues during this process, consider reaching out to Onity Tech Support for further assistance.
I can't leave a comment after logging in..
Anywhere in particular? You seem to managing just fine here!
https://www.fixya.com/users/atos-maximus
For some strange reason you are answering Solved questions from August 2012??
..
Not finding what you are looking for?