20 Most Recent
Metz 45 CL-1 Flash - Page 3 Questions & Answers
Metz 44
Flash information can be gotten via the USB port. Check owners manual
2/20/2015 6:35:24 PM •
Metz Cameras
•
Answered
on Feb 20, 2015
Dismount
At the base of the unit is a compression ring used to secure it to the flash "shoe" of the camera. Turn the ring to right viewing the rear of the camera body. Then simply pull the flash straight back.
2/20/2015 5:44:34 PM •
Metz Cameras
•
Answered
on Feb 20, 2015
Metz 44AF-4C ready light does not come on,has new batteries, all functions work?
The energy for the very short, very high brightness flash is held in the flash capacitor of the photo flash lamp. This capacitor degrades if is not charged for long (years), and needs formatting, which is a slow charging and 2-3 consecutive shots. Sometime the first charging takes significantly longer than normal time, even minutes. If however the ready lamp does not come up even after some minutes, the flash lamp may have developed an internal fault, which can only fixed by a trained repairman. Another common culprit is wrong contact in the battery compartment. Batteries left in the flash for long often leak, and corrode the contact springs and leaves. These can be cleaned with soaked with vinegar cotton tabs (ear cleaning buds), followed by mechanical cleaning with pencil eraser.
3/1/2014 9:38:48 AM •
Metz Cameras
•
Answered
on Mar 01, 2014
Not finding what you are looking for?