20 Most Recent Copystar CS-1650 All-In-One Laser Printer - Page 4 Questions & Answers

A complete list of Copystar error codes is here: Copystar Error Codes

I most cases you do not! You can replace the toner and that usually has the wiper, you can change the corona wire but the drum is very delicate and should not be cleaned unless you know how to clean it and have special tools etc.

When the paper does not feed straight, dirty or stickyrollers can cause it to jamb or crinkle, also failure to remove all traces ofpaper from a previous paper jamb will cause further paper jambs.Check for tiny pieces of at the edges of the rollers, and remove these piecesof paper.The rollers may be dirty or sticky and causes the paper tonot feed straight.Try cleaning the rollers with methylated spirits.

Sounds like you have a faulty thermistor. (heat sensing device) The 6020 indicates an abnormally HIGH temperature. If the readings are greatly different in the two thermistiors or one is not touching the hot roller could also be the problem.

Hi amanda_blevi,

I would like to clarify if what is the brand and model name of your unit?

Thank you for using FixYa.