20 Most Recent Disney DT1350-P 13" TV Questions & Answers

030.031.038. Try these codes. If you wish to get more, http://electrohelponline.blogspot.com. Try this link.

I used the vibe 4 in one but with Emerson codes1008

If you have a cable box from Verizon get them to set it up for you.

Make sure someone hasn't pressed 'mute' on the remote. Also, if there is a 'menu' button, trying going in and seeing if someone accidentally changed the settings in there. The other possibility is that if there is a place for headphones to be plugged in, make sure there are none plugged in to the port, because the sound would then bypass the speakers to go out of the headphones.

Unlikely to program to a universal and if it does will not do some things , key things.

Look in the closed caption area for TEXT to see if engaged---it will do this.

Hi. I have been going nuts for the past few days trying to figure this out. I went thru 5 universal remotes and tons of research online and i found only one solution. Not a remote but a R F modulater fixed my problem. You can get one on ebay cheap. Walmart also. Worked for us. Now my daughter can watch a dvd.

Final anode cap arcing is the problem to your TV. Just unplug final anode cap from the top of the picture tube bell.[discharge the final anode properly before remote it]. Sometimes LOT {line Output Transformer} might be repalced. Picture of the LOT is attached here. You can see the final anode cap, an attached part to LOT. It is silicone rubber cap, look like a ****** at the end of EHT wire.

I used Memorex code 135

Hi,Sorry, there is not a reset on this TV.No signs of life can be anything from a Fuse, to failed components on the power supply.I suggest having it to a local repair shop which has the training and proper equipment to disassemble the TV and replace the failed component(s).Expect a diagnostic fee of $40 (depending on your location) that is credited toward the repair bill.Thanks