Top 20
Symphonic WF-719 19 in. TV/VCR/DVD Combo Questions & Answers
The remote won't work with tv and the batteries have been changed
Most TV shops can test the remote to see if sending by pointing the remote at it and pressing buttons.Many digital cameras in a dark room will react with a tiny flash of light on the camera display when the remote is pointed at it and buttons pressed.The remote may also if not working be repaired by most shops--we get 5 dollars if we can fix one--usually easy money.
How can i access the
Purchase a replacement 'universal' remote - widely available from electrical / tv stores
Tv wont turn on
Hi tii, my name is John. Welcome to FixYa. Check that you have power to the unit. Unplug it for one (1) hour and see if it will reset. If you still have a problem with it and are not affraid of high- voltage, because it is deadly. Re-post and let me know, I will post the steps and tools needed to repair it. Thanks for choosing FixYa. Happy Holidays.......John
I can't find a code to set the remote for my
Hello, on some of these combinations you might have to try not only the TV codes on your universal remote list, but also the DVD or VCR codes also. One of these three will program your universal remote, but make a note: you may have a partial function on your remote ie: power, but no volume control or channel scan(up/dn) or no number operation(0-9). This happens on some of the universal remotes not all of them. thanks!
Antenna/Cable Switch
You can get a 75 Ohm to 300 Ohm balun from a local Radio Shack Store and connect it to VHF antenna but you won't be able to receive off the air signals for very long because in about a month all TV signals will be being broadcast in Digital Format nationwide and all you will receive is SNOW. You'll need to also buy a Digital to Analog conversion unit as well to receive off the air programming. Sorry for the bad news but that's the advancement of technology and mandates from our government (FCC).
Hope this helps and Happy New Year,
Backyard_Jim
Lost the remote, can't get into "game mode"
Some have a tv or vcr mode, some have a game button,, or go to setup and just go through all the
options,, sometimes ull find it ,,, up down channel and vol.. up and down,, just keep hittin buttons u might connect with it...they are all different....specially universals,,, do u have the right #s for the universal in it? shut it all down and try it again..??? sry if im wrong just tryin to help.. Ill look for more if u have no luck if u want....
Television shuts off by itself
TRY THESE STEPS
>Check the buttons on the TV make sure they are clean and not sticking.
>Check the Remote Control buttons and see if they are sticking
>Clean the Face of the infer Red lens to the remote and the TV...
clean them with a small rag or paper towel (Do Not USE Abrasives to clean any part of your Electronics)
>Check the plug for any defects
>Reset your tv back to it,s factory settings
>And if any thing locate your user manual and find the 1-800 number
Tape wont eject
Veri8fy that the belt on the side of the VCR mechanism is intact. If it is, then check that the motor works, by appying 12 volts to it,with the belt disconnected. If the motor works, it might be that your mode switch needs cleaning, and that takes some fancy unsoldering and soldering.
Tv shuts off
TRY THESE STEPS
>Check the buttons on the TV make sure they are clean and not sticking.
>Check the Remote Control buttons and see if they are sticking
>Clean the Face of the infer Red lens to the remote and the TV...
clean them with a small rag or paper towel (Do Not USE Abrasives to clean any part of your Electronics)
>Check the plug for any defects
>Reset your tv back to it,s factory settings
>And if any thing locate your user manual and find the 1-800 number
(please feel fry to leave a rating)
Not finding what you are looking for?