Top 20 Symphonic WF802 - Page 5 Questions & Answers

Set up codes for Symphonic TV are: 0053 0189 0227 0456 0024

On Symphonic (Funai) you always need a working original remote--universal will not have the function needed.

Check whether signals from Xbox is compactable to TV inputs. Check the inter connection cables.

These are the setup codes for Symphonic TV. 0053 0189 0227 0456 0024

It is a parental control--programs that are violent or contain unwanted content can be blocked from viewing.

Check picture settings.

What is the exact model number to your Symphonic?

tried to press the tv/video button at the panel of the tv.

Try this link to know more.

Set the systmem selection control to "Auto"

If your TV has a Menu button on its front panel, you can enter its menu options, surf through, and come to input selection window. Here you can select the inputs. If there is no such Menu button, you must have its remote control to select it.

For dish network 632,657,662,679,682,694,733,756,841,846.and here are some universal remote codes. 0572,0324,0225,0247

Hi Erica,Black box is a closed caption without a text. To resolve the issue, go to the menu, navigate to CC (closed caption), turned it off.Hope I helped you.Have a nice day!Jdvillanueva

In most cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.

The main motor will not work in some cases as unless the tracks are read the drive motor will not work with signal from the processor. Also in some cases the central motor base can shift and so the distance to the disc can be more resulting in low detection. You can pull up the spindle to come closer. Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye.If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault.If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board

Thank you for using Fixya

Hi,

May I know the exact brand and model no. of your unit, it will help to determine where the fault came from.

Jdvillanueva

Look for the input or source button on your remote or on the tv itself. Or go into the menu and select "game".

If it is NOT high definition, you will need to buy a digital tuner for free over the air channels.

After confirming by viewing the operation manual for this unit, this TV is only capable of inputting a baseband video and standard audio. Unless the Satellite Receiver you have has those type of output jacks then this TV will not be able to reproduce picture or sound from the Receiver. It may be possible to connect through the antenna connection but again the Satellite would need a connector that would output on Channel 3 or 4. Most recent satellite receivers do not offer these ouputs. You indicate that the Receiver you have is High Def. The TV you have is not high def and would drastically down grade the quality of your picture and audio being delivered by the satellite receiver

Television system: NTSC-M

TV Standard

Closed Caption

System: §15.119/FCC

Channel coverage

VHF: 2 - 13

UHF: 14 - 69

CATV: 2 - 13, A - W,

W+1 - W+84,

A-5 - A-1, 5A

Tuning System: 181 channel

frequency synthesized

tuning system

Channel access: Direct access keyboard,

programmable

scan and up/down

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced

(F-type)

Video input: RCA connector x 1

(1 x Front)

Audio input: RCA connector x 1

(1 x Front)

1 speaker

ELECTRICAL SPECIFICATIONS

Sound output: 1W, 8 ohm x 1

OTHER SPECIFICATIONS

Remote control: Digital encoded

infrared light system

Operating

temperature: 5°C to 40°C

(41°F - 104°F)

Power requirements: AC120V, 60Hz

Power consumption

(Maximum): 98W

Picture tube: 23"

Dimensions: H : 20-3/8" (518mm)

W: 22-13/16" (580mm)

D : 18-7/16" (469mm)

Weight: 55.1lbs. (25kg)

•Designs and specifications are subject to

change without notice and without our

legal obligation.
•If there is a discrepancy between languages,

An easy way to test for output on the remote controllers is to point them at a camera from a mobile phone. If you watch the camera picture whilst pressing buttons, the LED's will flash and show you the output. If you have dodgey buttons, it will show up as no LED flash.
Hope that helps to decide where your fault is.

If you have an "input" button on the top, front , side, of your set, push that.