Top 20 Symphonic WF802 Questions & Answers


Well the list on my universal remote by Philips Universal remote.. says for VCR Pansonic try one of these: 0937, 0739, 0039, 0938, 0124, 0345, 0830. It says to then press + Channel key till channel changes then press Mute to set.

Symphonic WF802 | 182 views | 0 helpful votes


Can only find 2

20675 20821

Symphonic WF802 | 345 views | 0 helpful votes


clean the heads and retime the gears.

Symphonic WF802 | 579 views | 0 helpful votes


can i make my symphonic-wf 802 region free

Symphonic WF802 | 203 views | 0 helpful votes


VCRs are so cheaply priced these days that it's not worth the time and trouble to fix them or have them repaired. If you fix one worn or slipping belt, another problem isn't far behind.

Symphonic WF802 | 315 views | 0 helpful votes


Connect the converter box to TV, (usually rca connectors) connect an antenna to the box, turn it on and search for available channels. In most areas you should receive 10-20 channels.

Symphonic... | 17 views | 0 helpful votes


Gave to you already.

Symphonic... | 225 views | 0 helpful votes


Symphonic TV 3 Digit Remote Control Codes
198
003
053
155
189

Symphonic TV 4 Digit Remote Control Codes
1280
1384
1483
1484
1024
1031
1036
1105





Symphonic... | 60 views | 0 helpful votes


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Symphonic... | 202 views | 0 helpful votes


hi Noel
this is all i could find.
Symphonic 10180, 10171.
if none work go to this link might help you out.
5 Digit Universal Remote Codes For TV Codes For Universal Remotes

Symphonic... | 216 views | 0 helpful votes


If there isn't a menu or input button on the TV near the power/volume/channel buttons, you can't and have to go find one on eBay instead.

Symphonic... | 487 views | 0 helpful votes


you get the best remote you can and program it according to instructions that come with it

Symphonic... | 63 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Symphonic... | 34 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
0611 0044 0166 0539 0231 0536 0633 Check these codes first.

Symphonic... | 31 views | 0 helpful votes


Try using code search to find something that works. If search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Symphonic... | 61 views | 0 helpful votes


Use code search on the remote to find something that handles some or all functions of your Symphonic TV. If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.

Symphonic... | 52 views | 0 helpful votes


You should have a remote control to select it's inputs. If you wish to get more details visit the sites linked here. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/

Symphonic... | 94 views | 0 helpful votes

Not finding what you are looking for?
Symphonic WF802 Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Symphonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6068 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Symphonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Symphonic Televison & Video

  • Symphonic Televison & Video

Most Popular Question

need 3 digit manufacturers code

  • Televison & Video
Loading...