20 Most Recent Konica Minolta magicolor 5430 DL Laser Printer - Page 7 Questions & Answers

What color? if all then xfer belt. or replace all image units Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

What do the internal prints look like demo page or counter list? What color is faded? Replace that image unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc try this web site for correct drivers Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The papaer size it is correct in the printer properties? Or the tray selected is good? Put them on auto

Enter service mode by pressing Utility /counter then details then stop00 stop01. Select System 1 Trouble Isolation. Then select draw 4. will require you to power off the machine wait ten seconds before powering on. You should notice that draw four no longer appears on the screen. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The transfer roller is the sponge looking roller at ea. Replacing the transfer belt mite also be a good idea.ch end of the roller should be clips allowing it to be removed Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

NO. They do not allow that is how they make their profit. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

What model sir/mam? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Yes, as long it did not get wet or used( reached its copy life).

Your consumables may need replacing

Does it fade across or down? Is the printer on a level surface? (important!) or Take toner cart out and shake it side to side gently, replace it. Is it any better? (yes indicates low toner) You may just need a new toner cart or drum http://printer.konicaminolta.net/drivers/manuals/2300dl/eg_user.pdf

Use the link below: http://www.magicjack.com/plus-v05/customercare.html

that we are call preventive maintenance, you need to exchange drum dev'r consumable etc, then auto atdc just acess the tech rep.

try to look the lever...near in transfer belt, or try to repl. the sensor