20 Most Recent
Konica Minolta PagePro 1350W Laser Printer - Page 5 Questions & Answers
My error light is flashing - but I can stll
HI there,
On this model, the error light usually is warning of toner getting low.
Still, it begs the question; "Is a printer a person or is an attorney a thing?", because both of them will lie to you.
After a few copies, black lines over entire page.
the toner comes with a drum if you look at the drum you should see black line try to clean it by rolling it forth and back or there is some toner inside the printer most of the time there is a scratch on the drum ,
My konica minolta printer wont
Have you tried to reinstall the driver and all the associated software for the printer? If not do it right away - don't forget to unplug the printer from the pc before doing that.
Power is not coming
may be your power supply unit is not working, you have to take it for servicing
Lost the CD for 1350W installation. Need to find
The drivers can be downloaded from this link below.
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=979&filetypeid=0&osid=3
Utilities can be download from this link.
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=979&filetypeid=5&osid=3
Robert from Blitware
I replaced the toner drum and i still get a
try to reinstall the printer driver software. you can download the printer driver software from your printer manufacturer's web site then restart the computer and printer.
How to refil konica minolta toner
Hi,
Shop for the appropriate refill kit. When purchasing a refill kit, double-check to be sure that the toner in the kit is compatible with the toner required for your model of Konica Minolta printer.
Step 2
Empty the old printer cartridge. Be sure to completely empty the printer cartridge that you plan to refill. A compressed air can is ideal for this purpose and can be purchased online or at most office supply stores.
Step 3
Remove the plug. The cartridge plug may be covered by a colored end plate, depending upon the model of your Konica Minolta printer. Simply unscrew the end plate, and then remove the plug. If using a screwdriver to remove the plug, be careful not to puncture the plug, as this will cause the toner to leak out of the cartridge and into your printer.
Step 4
Refill the printer cartridge. Shaking the powder in the refill toner bottle before attempting to pour it into the cartridge will cause it to pour much more easily. Do not squeeze the bottle, but allow the toner to simply pour out. Replug the cartridge, and gently shake or rock it back and forth two or three times to evenly distribute the toner powder inside the cartridge.
Step 5
Check for leaks. Before returning the cartridge to the printer, check the outside of the cartridge for any powder particles that may have spilled or leaked during the refill process. Wipe the particles off the cartridge, and gently shake it once more to check again for leaks. If no powder particles appear, then it should be safe to return the cartridge to the printer.
Step 6
Return the cartridge to the printer. Once you have refilled the printer cartridge and have checked for leaks, you may now return it to the printer. Go to your printer properties/settings and select the option to indicate that a new printer cartridge has been installed. Print a sample page to check print quality
Please post your feedback and Vote if the problem resolved as per your satisfaction.
Not finding what you are looking for?