Top 20
Verbatim CORPORATION 94933 USB 2.1GB Store-n-go HD Drive (VE94933) Hard Drive - Page 9 Questions & Answers
Verbatim 160GB Hard Drive won't boot.
Try it on another PC or on a powered USB hub: maybe it's not getting enough power to run.
If it still doesn't work, and you don't hear the drive's spin-up noise, the electronics may be damaged, the internal disk disconnected or the internal power connection faulty.
If you hear the spin-up whirring and then a series of repeated whirrs and clacks, ending after about 30 seconds - one minute, the disk might be damaged. It still might be recoverable if extracted from the case and connected directly to an appropriate hard disk port (a 3.5 to 2.5 adapter might be necessary), but when things go this far, the chances aren't too good.
10/27/2009 12:52:53 PM •
Verbatim...
•
635 views • 0 helpful votes
Ok this TB external is
I'm sorry to say but based on your statement, the HD is starting to quit working. Try the following first:
1. Try connecting the external HD into another computer. And if the other computer can detect the HD, immediately back the files up.
2. After backing up the files, reformat your HD and reconnect it to the computer that you are having a problem with.
But if you are hearing a clicking sound while the external HD is ON, I'm sorry but the HD is no longer functioning. The clicking sound is also called the "Click of Death" for hard drives.
Have a great day!
1/1/2010 7:20:00 PM •
Verbatim...
•
97 views • 0 helpful votes
Strange noises from external hard drive and won't
Is your hard drive in a vertical position? If not, turn your PC off, secure the hard drive into its housing, making sure that it is not touching anything underneath. Restart the computer
If it is still noisy and not reading, the platters inside have become damaged. You will have to replace your drive.
9/14/2009 11:39:17 AM •
Verbatim...
•
347 views • 0 helpful votes
Verbatim 8GB Styore N Go USB HD
I feel like the device should show up in "My Computer" unless it is defective. However, there is some Vista Security Software and a downloadable pdf file on the Verbatim Website that describes driver issues with the Store and Go. See URL below
www. verbatim.com.au/products.cfm?productID=99507&cid=2
Normally, these things only need drivers for win98SE
5/24/2008 5:17:16 PM •
Verbatim...
•
418 views • 0 helpful votes
Verbatim Portable hard drive ? download entire desktop with applications ?
Don't know why you might want to do this, but assuming the portable drive is equal to or bigger than your system drive (C:), I would recommend you check out Ghost software (not sure of name) but this will put you on it. With Ghost, you make a mirror image of an entire hard drive. I used it to make multiple copies of entire PC's for classroom use.. i.e. Load one PC with all the OS and program software, and then connect other drives to the "Master" one at a time, until I had a classroom full of identical systems. Had to pull the drives, but since yours is already external, connectivity would be the only issue. USB should work, I would think.
5/25/2008 11:24:04 PM •
Verbatim...
•
397 views • 0 helpful votes
Como cancelar el winter driver
EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,
How to resolve your meter when it's on temper mode
Tamper mode means the prepaid meter is in a mode where it does not supply power. Check your meter remote controller (used for recharging units). If it displays a Relay Open symbol, the meter is in tamper mode.
To remove tamper mode requires you contact the distributing company and request a tamper reset token. The tamper reset token is a 20-digit code that clears the meter from tamper mode and restores it to its default state.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Is there any one here know B**** food equipment? I have question about this company?
As you are Anonymous, it would seem like this is a veiled advert to get the company name promoted.The company is in British Columbia, Canada. What is your concern? I am in Ontario and have had a 50 years career in catering.Finding them is easy, reviews are goodRahmalek "Very good service, best prices in town."Mikey "Great customer service, reasonable service fees and on time all the time."salek "Great experience working with B***** FOOD equipment. excellent customer service."..
Not finding what you are looking for?