20 Most Recent Pioneer HTD-510 System - Page 9 Questions & Answers

Hi, what the error code is telling you, NG: LCRSLSRBLBR, is that due to some output problem or power supply, the speaker outputs are not working, NG by Non Good, L by Left, C by Center, R by Right, SL by Surround Left, SR by Surround Right, BL by Back Left and BR by Back Right I suggest you check all speaker connections, disconnect all speakers and see that this is the same, the problem is in the computer, if it does not indicate failure, then go connecting the speakers one by one until the fault appears again and in that last speaker connected, the fault could be, try all the speakers I hope you can solve the problem, but look for a specialized technical service Greetings Franco Dosil Hola, lo que te esta indicando el c?digo de error, NG:LCRSLSRBLBR , es que por algun problema de salida o fuente de alimentaci?n, no est?n funcionando las salidas de parlante, NG por Non Good, L por Left, C por Center, R por Right, SL por Surround Left, SR por Surround Right, BL por Back Left y BR por Back Right Te sugiero revises todas las conexiones de parlantes, desconecta todos los parlantes y observas que esta igual, el problema esta en el equipo, si no indica falla, entonces ve conectando de a uno los parlantes hasta que te aparezca nuevamente la falla y en ese ultimo parlante conectado, podr?a estar la falla, prueba todos los parlantes Espero puedas resolver el problema, sino busca un servicio t?cnico especializado Saludos Franco Dosil

Hello Danny, for what you are saying, do you need a telephone amplifier, to increase the volume of your phone and connect it to your Pioneer? usually the signal level of a phone, reaches to excite the Pioneer You connect it through the Auxiliary input and you can play it You can also find some application on the phone, which increases the output level Discuss, if another is the reason for your question Greetings Franco Dosil Hola Danny, por lo que comentas, necesitas un amplificador de telefono, para incrementar el volumen de tu telefono y conectarlo a tu Pioneer? por lo general el nivel de se?al de un telefono, alcanza para excitar al Pioneer Lo conectas por la entrada Auxiliar y puedes reproducirlo Tambien puedes buscar alguna aplicacion en el telefono, que te incremente el nivel de salida Comenta, si es otro el motivo de tu pregunta Saludos Franco Dosil https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/VSX-D508+OPERATING+INSTRUCTIONS

Hello Victor, I sent you the link of the user manual and service manual of your Pioneer VSX-D512 Hope this can help you Greetings Franco Dosil Publicado por Victor en 18 de junio de 2019 Hola Victor, te envio el link del manual de usuario y manual de servicio de tu Pioneer VSX-D512 Espero que te sirva Saludos Franco Dosil http://www.kallhovde.com/pioneer/tricomp/Audio/VSX/VSX-D512_RRV2743.pdf https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/VSX-D412+Operating+Instructions http://www.pioneer-latin.com/downloads/xre3069a.pdf

Your X2800BS most likely can't read the music format.

Hello Laurence, you can not enable the subwoofer output, from the equipment, only with the remote control You should buy a new one, I will send you the link to download the user manual and have a reference of the remote control I hope you can solve the problem Greetings Franco Dosil Hola Laurence, no puedes habilitar la salida subwoofer, desde el equipo, solamente con el control remoto Deberias comprar uno nuevo, te envio el link para que descargues el manual de usuario y tengas referencia del control remoto Espero puedas resolver el problema Saludos Franco Dosil https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/ci.Operating+Instructions+VSX-D498.Protected https://www.amazon.com/Replacement-Control-PIONEER-VSXD498-CUVSX157/dp/B009D5IXA2 https://www.aliexpress.com/item/Remote-Control-For-Pioneer-VSX-D498-AXD7662-8300766200010IL-VSX-42-AXD7632-VSX-500-VSX-300-VSX/32851398929.html

sounds like the rectifier has gone bad

Hi This is what I found out ..cheers

"I have a Pioneer VSX-1022 receiver. I was setting a FireTV to control it. FireTV turned it off but couldn't turn it back on. I held down the Adv Surround button and the Standby button and it came back on. Seemed to be working fine. Turned it off. Came back later to watch some TV and t wouldn't turn on. " Maybe setting problem. Download VSX1022 service manual to read advance setting if this manual has. If problem cannot solve, just phone pioneer to call for help or send an email to their service department. They will help you. I recommend phone them. Don't be shame when call for help.

Hello Warrior, for what you describe you want to connect to a Pioneer Vsxd 901s, an equalizer and this to two amplifiers, to give you an idea, I need you to describe the equipment you want to interconnect, brands and models and also comment what you want to achieve to be able to advise you in the best possible way I await your response with the information of your teams Greetings Franco Dosil Hola Warrior, por lo que describes quieres conectar a un Pioneer Vsxd 901s, un ecualizador y este a dos amplificadores, para poder darte una idea, necesito que describas los equipos que quieres interconectar, marcas y modelos y tambi?n comenta lo que deseas lograr para poder aconsejarte de la mejor manera posible Espero tu respuesta con la informaci?n de tus equipos Saludos Franco Dosil

unplug it and press the power buton and then hold the power button, and while your holding the power button, plug it back in

hope it worked!!!

“My pioneer VSX-531 volume turn download” download VSX-531 service manual and look for a volume control IC and check voltage supply if it is correct. If correct, check volume output,treble and bass waveforms to see if they are correct. If not, replace the IC. If not fixed, replace volume control.

Hello Ron, your Pioneer, does not own a Factory Reset The problem that has no sound in any of the speakers, probably is due to the integrated power circuit, is burned It has in the same integrated circuit, the two audio channels I suggest you consult a specialized technical service I hope I can solve the problem Greetings Franco Dosil Hola Ron, su Pioneer, no posee un Restablecimiento de Fabrica El problema que no tiene sonido en ninguno de los parlantes, probablemente se debe a que el circuito integrado de potencia, se encuentre quemado Tiene en el mismo circuito integrado, los dos canales de audio Le sugiero consulte en un servicio t?cnico especializado Espero logre resolver el problema Saludos Franco Dosil

“no sound coming out from the speaker” Choose radio to see if sound produces from speakers. If no, check switching control (control which signal is inputted such as radio, CD and aux.)IC & its voltage as well as voltage & power amp, including their voltage supply. Don't forget to download pioneer XV-EV9 service manual. If it have a DSP, it is also need to be checked by an oscilloscope including DSP X'tal(crystal) signal I/O,clock signal such as, L/Rclock(LRCL), bit clock(BCK),audio clock(ACK), DATA I/O.

Hello Jade, so you describe there may be a problem in the Stanby circuit or secondary source I am looking for the service manual of your Pioneer VSX-D702S and I can not find it, nor do I find information of that model, if with the models D701S and D703S You could confirm the model of your Pioneer, to study the circuit and see the possibilities of failure Send a photo of the front and one of the back I wait your answer Greetings Franco Dosil Hola Jade, por lo que describes puede haber un problema en el circuito de Stanby o fuente secundaria Estoy buscando el manual de servicio de tu Pioneer VSX-D702S y no lo encuentro, tampoco encuentro informacion de ese modelo, si con los modelos D701S y D703S Podr?as confirmar el modelo de tu Pioneer, para estudiar el circuito y ver las posibilidades de falla Manda una foto del frente y otra de la parte posterior Espero tu respuesta Saludos Franco Dosil

Hello Jim, if the components you describe bring the indication recorded on them, 2SB530 or B530 and 2SD370 or D370, are the output transistors of your Pioneer SA8100 and as you describe are mounted on heat sink (aluminum) Ask, what kind of failure do you want to fix? I hope that my answer help you Greetings Franco Dosil Hola Jim, si los componentes que describes traen la indicaci?n grabada en ellos de, 2SB530 o B530 y 2SD370 o D370, son los transistores de salida de tu Pioneer SA8100 y como describes est?n montados en disipador de calor (de aluminio) Pregunta, que tipo de falla quieres arreglar? Espero te haya servido mi respuesta Saludos Franco Dosil

Hello Waseem, check that you have the connections between the Pioneer and your TV, so connect from the Pioneer's HDMI output to the HDMI input on the TV, with an HDMI-HDMI cable Verify that the TV is selected for the Blu-Ray input I hope you have luck in the checkup Greeting Franco Dosil Hola Waseem, verifica que tengas bien las conexiones entre el Pioneer y tu televisor, osea conectar desde la salida HDMI del Pioneer a la una entrada HDMI en el televisor, con un cable HDMI-HDMI Verifica que el televisor se encuentre seleccionado para la entrada del Blu-Ray Espero que tengas suerte en el chequeo Saludo Franco Dosil

Hello John, to get sound in the "System B" really called "Zone 2" you have to select in the menu, which sound source will come out through this output and there you will have the solution In the user manual it is well specified Hola John, para obtener sonido en el "Sistema B" realmente denominados "Zona 2" tiene que seleccionar en el menu, que fuente de sonido va a salir por esta salida y ahi tendra la solucion En el manual de usuarrio esta bien especificado https://data2.manualslib.com/pdf2/44/4378/437730-pioneer/vsx1122k_operating_instructions.pdf?4c787a85640d8c79c964ed8b0fc26af7&take=binary

Hello Dennis, obviously you have a problem in the power supply or the power output stages, which is why the 1.25 A 125 V fuse is burned Hola Dennis, evidentemente tienes un problema en la fuente de alimentaci?n o las etapas de salida de potencia, motivo por el cual se quema el fusible de 1.25 A 125 V

Hello Yokow, do a simple test, connect another set of speakers to the Pioneer team, if you see the high pitched sounds, the problem is in the speakers, in the same way, test the speakers on another equipment and listen to the result, there you will know where it is the problem Greetings Franco Dosil Hola Yokow, haz una prueba simple, conecta otro juego de bafles al equipo Pioneer, si te aparece los sonidos agudos, el problema lo tienes en los bafles, de igual manera prueba los bafles en otro equipo y escucha el resultado, ahi sabras donde esta el problema Saludos Franco Dosil

Hello Nasir, obviously you have a problem in power supply or in the power output stages, since the equipment is being protected Hola Nasir, evidentemente tienes un problema en fuente de alimentaci?n o en las etapas de salida de potencia, ya que el equipo se esta protegiendo