Top 20
Pioneer VSX-305 Receiver Questions & Answers
DVD player will not read disc
It sounds like its not reading the disc, most the time that is caused by a bad processor and that isn't something you can fix yourself
Why does the fuse blow?
try a different sub first, the fuse difference is not crucial but should try to use the one recomended by manufaturer
Pioneer Receiver Manuals
Go to eservice: http://www.eserviceinfo.com/index.php?what=search2 and search for VSX-305. You can downlaod the manual. The service manual is widely found with a google search but is also listed at the eservice website. Oh, Ebay has the service manuals as well.
Need a pioneer vsx
Search eBay for "Pioneer vsx-305 remote" and check the 'Include description' box. Many available.
I have a Pioneer VSX-305 receiver. I blew channel
There are independent relays for the speaker A and B switching.Best place to start would be from the relay. When you select A do you hear a click, if not relay is not switching. The circuit involved is a small transistor , a low value resistor ( could be the culprit ) and a shunt diode.
My vsx-305 is stuck on
Rotate the volume knob. Contrary to popular belief, manual switches on the front of a unit DO have functions.
I have a pioneer vsx-30 with hdcp error on the
Component cables don't have the ability to carry decrypted HD info.
HDCP is "High Definition Copy Protection"...In theory, it prevents you from running the HDMI cable out of your receiver, and into a recording device, thereby recording HD content without a license for it.
HDCP handshaking is done between devices that run HDMI, or DVI.
If you're running component from your Cable box, and then HDMI out to your TV, then the content you're carrying from the Cable box may not be getting decrypted properly when it gets upscaled onto the HDMI port from Component.
IT could also simply be that you're using an HDMI 1.1 or HDMI 1.2 cable, which may not be able to carry the high bandwidth stream of your Receiver and TV.
Please be sure that all HDMI devices can support the same HDMI version, and also be sure your HDMI cable is labled "HDMI 1.x compliant". . .e.g. if your TV and Amp support HDMI 1.2, make sure you're also using an HDMI 1.2 Cable.
My pioneer receiver has distorted sound or
Sounds like you may have smoked your output stage in the amplifier...this can be caused by using defective speakers, hooking it up while it is on, or too much volume..Can also be caused by power surges...You will probably need to have a service man check it out to make sure this is the problem.
Looking for owners manual & how to connect to
The front speakers go into the sub in the two bottom inputs from the receiver. the two upper are outputs to the actual speakers,SOYOU RUN RUN THE FRONT SPEAKER WIRES FROM THE RECEIVER TO THE INPUT OR LOWER CLIPS ON SUB,THEN RUN WIRES FROM THE OUTPUT OR UPPER CLIPS FROM SUB TO THE FRONT SPEAKERS.
I need a fuse for my pioneer vsx-305. It is a 6.3
I don't know where you are, but if you're in the US (and guessing by your username, I'll bet you are),
Radio Shack carries them. You could mail order them if you aren't near a store. In a pinch, you could also use a 6.5 amp fuse in place of the 6.3 amp. That's only 200 mA (milliamps, or thousandths of an amp) larger, which is only a small percent increase.
Not finding what you are looking for?