Top 20 Technics SL-DZ1200 CD Player - Page 9 Questions & Answers

Hi if u have checked everything out the only thing left is to replace the IC.amplifier chip which is bolted to the large silver heat sink...when u replace make sure u put some new heat sink compound on the IC ..if u don't know how to use a soldering iron properly don't attempt to do it u can easily destroy the new IC chip with heat .cheers

hi, hi, take the cover off, airdust it , check wiring harness on main board and back board. resecure. while leaving the cover off get a table fan and point air at it while its on. if it behaves you can now build yourself a internal fan out of an old computer fans .. jm

Of course you can!

WHAT IS QUESTION

To be honest most people simply replace the keyboard than try and fix them. They are not expensive. You could have a problem with the driver for the keyboard, so you could update it. That's worth a try before chucking the keyboard!

First, I'm not a Technics tech. * Normally I would suggest to check for warranty, but this unit is outdated. * Try to contact ; https://www.technics.com/us/support/ *** The following is for information only.*** * The following vid shows the speed switch on the left. If it's not tracking then there may be a problem in the selector switch, sync tracking, or motor drive. * You may want to check the "window" or sensor of the the speed sync light (the orange light). Wipe down the lamp and the peep hole where the sensor is located (on or near the lamp) * Wipe down the outer edge of the turn table to clean the metal "dots" or "bars" on the rim. This is what the sensor reads to determine speed. * Speed controls and direct drive turntable are not customer serviced parts (other than replacement of the component). * Example of play; https://www.youtube.com/watch?v=YUaywfmnvt0 * Closer look at auto play feature; https://www.youtube.com/watch?v=A7RURSnbSz4 * SL-1510 Mk2 repair; https://www.youtube.com/watch?v=Unf0rtQI0Us * SL-1900 repair; https://www.youtube.com/watch?v=k0HTskP4Wak * SL-1210 repair; https://www.youtube.com/watch?v=dKpQ3j6WzXQ * SL-23 repair;https://www.youtube.com/watch?v=hTTLkQosBzc * Repeating Return problem; https://www.youtube.com/watch?v=-tel1eKu9YI * SL-1200 Speed changes(sync); https://www.youtube.com/watch?v=jVws5t25XPk * SL-1300 Speed problem; https://www.youtube.com/watch?v=0Dg-S0QPaek * SL-1200 Very DEEP level repair; https://www.youtube.com/watch?v=mEvOpKsJMRo Aloha, ukeboy57

The first thing to do is check the connection to the TV. Is the right output from the TV actually connected? Check your cables from the TV to the amp.

Trash it, There are no repair parts available. Why spend several hundreds of dollars for test equipment, that you have need of

Hi try this ...cheers

https://www.ebay.com/itm/Technics-sl-js1-Original-Turntable-Turntable-Service-Manual-WIRING-DIAGRAM-/323074678569 Technics sl js1 Original Turntable Turntable Service Manual WIRING DIAGRAM...

Technics SH GE50 Service Manual PDF Download This might help.

It is not Dolby Digital at all. It's just a Dolby Pro Logic. That means you have two front a centre channel for speech and back surround which is split between between two speakers. The difference is that the two back speakers on yours will produce the same sound from both. Whereas a Dolby 5.1 will produce individual sounds on the rear speakers and better definition on the other speakers. If you want better quality sound you need to upgrade it. I would go for one that has more channels than 5.1 and if you have a blu-ray player consider a Dolby Atmos one.

Save yourself $$$. Go to Ace hardware and get an O ring for 50 cents nstead of the $10 plus $3 shipping some websites want. 1 and 1/16 size. Have replaced these on a couple of technics SL MC models and works like a charm. No more error codes.

Technics SA 5250 Service Manual Technics SA 5250

Look for resistors that have changed color and are dark

No, You need phono preamp.

Time to replace the deck.

hi dick. go to this link and see if you can find it there. service manual for technics SL DD22 turntable Google Search

Have you tried cleaning the unit, there are discs to do that, 4 years is a long time?

if you open the panel look around for some blown fuses. be sure to unplug the receiver before and let it sit because there are two capacitors in there that hold a lethal charge of electricity. it could be a fuse but most likely its dead. probably a transformer or amp failure.