Top 20 Konica Minolta DiMAGE 7i Digital Camera Questions & Answers

Some sellers have some pretty good aftermarket replacements. Give them a look. Sony Center was makeing this job at 2010, but no more; even way, you could try calling at Digital Product Support: 1-877-462-4464 . Also, try asking in this link for Minolta Support site; additionally, I quote some comments about this part...

I got the round eyepiece from Orion Store Site and it fit perfectly. I liked it so much I adapted one to my more recent Panasonic. It was a perfect fit for the D7i. You stretch the rubber around the existing eyepiece.


Also, could try to contact with this seller: EC-1200-KONICA-MINOLTA-EYEPIECE-CUP-Dynax-5-4

Hope this helps.

I suspect 2GB is the maximum the camera will take. A 2GB Sandisk card works in my 7i. When the DiMAGE 7i was launched, 256mB was about as big as CF cards got!

Sometimes if batteries are allowed to completely discharge, they cannot come back.

You need to format the new card in the camera before using it.

Hello Sir

1. 1 Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
   
2. 2 Open up 'My Computer'. You should see it under the list of available drives.
   
3. 3 Check its contents first to make sure that you have the right drive.
   
4. 4 In 'My Computer', right-click on the drive and choose 'Format'.
   
5. 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
   
6. 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.
   

Having researched the internet - I've found a Minolta branded flashgun suitable for your camera. It has the bounce flash you ask for, however it's not cheap.

Here's the link:

http://www.crazycameras.co.uk/index.php?act=viewProd&productId=9097&aff_code=gg

go to www.memorysuppliers.com order the below item

1 SDCFB-1024-A10 - SanDisk 1GB / 1024MB Compact Flash card

TIPS:
1.)NEVER PUSH THE LENS IN AFTER CAMERA DIES, BUY A NEW BATTERY IMMEDIATLY AND TURN IT BACK ON, CLOSING THE LENS!

2.)NEVER USE AN AC ADAPTER, USE A RECHARGEABLE BATTERY OR A REGULAR BATTERY!

..to fix this...

Do as i say..

1.) Remove battery
2.) Remove front plate (screw driver may be needed)
3.) Check all gears, make sure they are correctly fitted in place)
4.) Move the gear manually to make the lens come out.
5.) keep it out, put the front plate back together.
6.) reinsert the battery, turn it on.


or...
1.) Remove the battery.
2.) Wait about 6-8 hours.
3.) Reinsert the battery.

or...
1.) Remove the battery.
2.) Try hooking it up through AC adapter, put correct voltage.
3.) Try turning it on.
4.) Remove AC adapter, reinsert battery.
5.) Turn it on.
If nothing happens just tell me..

Hope this may help;

Regards,
VOTIT

DONT FORGET TO RATE;

Here are some simple things to try first for a camera that won't power on:
http://camerarepair.blogspot.com/2007/11/simple-fix-for-dead-cameras-that-wont.html

I just found a solution to my camera problem. It turned out to be the batteries. We purchases some Rechargable Duracel with a 2650mAh rating. After charging the batteries I put them in the camera and it started right up and was taking photos like when we first bought it. I have not been able to use the camera in almost 2 years and it turns out the problem was weak batteries.

So anyone that has a Minolta Dimage 7i and cant get it to turn on make sure you have at least 2650mAh rated rechargable batteries. The higher the mAh rating the better.

Hope this helps someone else. We are ecstatic that we can use our camera again. No more using my camera phone!!!

You both are in luck. This sounds like a defective Sony CCD issue. Sony will fix your Minolta camera for free (with free shipping) regardless of warranty. You need to do this before March 31, 2008 so get going! See this link:
http://esupport.sony.com/US/perl/news-item.pl?template_id=1&news_id=131#
The Dimage models that Sony is accepting for the recall repair are:
Dimage 7HI, 7I, A1, Xi, F300, XT, X20, S414.

go to the Konica Minolta customer technical support[now part of Sony] However I doubt an item of this age is repairable due to lack of parts.

The camera does not require a new CCD. This problem is most likely due to a stuck or malfunctioning shutter mechanism in the lens. Normally the camera will open the shutter to allow you to see the image so you can compose, and then when you take the picture it will close the shutter momentarily and record what the CCD saw at that moment. If the shutter does not open in the first place - all you see is black. If this is in fact your issue the camera will need to be repaired. David Millier Advance Camera Repair

This is an update. Sony is now handling repairs for the defective Sony CCD issue. Sony will fix your Minolta camera for free (with free shipping) regardless of warranty. You need to do this before March 31, 2008 so for others who have this problem get going! See this link:
http://esupport.sony.com/US/perl/news-item.pl?template_id=1&news_id=131#
The Dimage models that Sony is accepting for the recall repair are:
Dimage 7HI, 7I, A1, Xi, F300, XT, X20, S414.

For the following cameras: Dimage PIC, Dimage V, Dimage EX 1500 (ZOOM or WIDE), RD-175, Dimage RD-3000, Dimage 2300, Dimage 2330, Minolta 3D-1500, we offer a 1 year limited USA warranty. Please see warranty details below. For the following cameras: DiMAGE 7, DiMAGE 5, DiMAGE S304, DiMAGE E201, DiMAGE S404, DiMAGE X, DiMAGE 7i and DiMAGE F100, DiMAGE F200, DiMAGE F300, DiMAGE 7Hi, DiMAGE S414, DiMAGE E223, DiMAGE X, DiMAGE Xi, DiMAGE Xt, DiMAGE A1, DiMAGE Z1, DiMAGE G500, DiMAGE X20, DiMAGE E323, and DiMAGE Xt Biz we offer a 1 Year limited international warranty. Please see international warranty details below. (All current Minolta and Konica warranties will continue to be honored by Konica Minolta.) MINOLTA CORPORATION U.S.A. LIMITED ONE (1) YEAR WARRANTY- Minolta Corporation 101 Williams Drive Ramsey, New Jersey 07446 (לMinoltaמ) warrants that the product set forth below, IF PURCHASED IN THE UNITED STATES OR ANY ISLAND IN CARIBBEAN SEA, will be free from defects in materials and workmanship for the period of one (1) year from the original date of purchase under the following terms and conditions:1. To obtain service under this warranty, send or deliver this product, within the warranty period together with this warranty certificate, to any Minolta regional office or Minolta authorized warranty service center, you must also present proof of purchase showing the date and place of purchase and, if not prohibited by local law, pay a handling fee. 2. If, upon inspection by Minolta or a Minolta authorized warranty service center, the product is proved to be defective, it will be repaired without charge using if necessary, new parts or comparable used parts which have been fully reconditioned, and returned to you. Where not prohibited by local law, a freight charge may be imposed for the return of the product to you. The warranty period for replacement parts shall extend for a period of six (6) months following the installation of same or for the remaining period of this warranty, whichever is longer.3. This warranty card does not apply in the following cases:(a) damage to the product due to mishandling, alteration, accident, impact dropped, sand and/or liquid or moisture damage, tampering, battery, or chemical corrosion, failure to follow operating, maintenance or environmental instructions prescribed by the applicable instruction manual or shipping damage; or,(b) damage caused during service performed by other than Minolta or a Minolta authorized warranty service center; or,(c) if the product has had its serial number(s) or other identifying data removed; or,(d) damage, defect or unsatisfactory performance caused by the use or attachment of lenses, flashes or other accessories not manufactured or distributed by Minolta. 4. ANY IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE, ARE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH BELOW FROM THE DATE OF PURCHASE,

With DMF function selected, focus can be manually changed after it has been once confirmed using camera's AF system. DMF cannot be used during continuous advance.

The DiMAGE 7i has four different image size settings; Full 2560x1920, UXGA 1600x1200, XGA 1280x960 and VGA 640-480. The recorded pixel size in each mode is almost equivalent to an image captured with a 5 mega pixel, a 2 mega-pixel, 1.3 mega-pixel, 0.35 mega-pixel DSC respectively.

The focus area can be set for Wide Focus Area, or Spot Focus Point. When using the Spot Focus Point, the DiMAGE 7i offers "Flex Focus Point (FFP) " for controlling the position of the Spot Focus Point. This is a powerful tool for off-center subjects.