20 Most Recent Minolta 110 Zoom Date 35mm Point and Shoot Camera - Page 9 Questions & Answers

It sounds like you may have an issue with the wheels on your vacuum cleaner. When the handle is down to clean carpets, it may be causing the back wheels to spring up, which is preventing the brush roll from making contact with the carpet and reducing suction. Here are a few things you can try to fix the issue:

1. Check the height adjustment on your vacuum cleaner. Some vacuums have a height adjustment feature that allows you to adjust the brush roll to the proper height for cleaning different types of floors. Make sure the height is set correctly for cleaning carpets.
2. Check the brush roll. Make sure the brush roll is free of debris and hair. If it is clogged, it can prevent the brush roll from making contact with the carpet and reduce suction. Clean the brush roll with a brush or scissors.
3. Check the wheels. Make sure the wheels are properly attached and not loose. If the wheels are loose, they may not be making good contact with the floor, causing the vacuum to lose suction.
4. Check the belt. Make sure the belt that drives the brush roll is not broken or worn. If the belt is worn or broken, it will prevent the brush roll from turning and reduce suction. Replace the belt if necessary.
5. Check the hose. Make sure the hose is not clogged and has no holes. If the hose is clogged or has holes, it will reduce suction. Clean the hose with a brush or replace it if necessary.

If you've tried all of these things and you're still having issues, it may be best to contact the manufacturer or a professional vacuum repair service for further assistance.

A blinking green light on a Segway Ninebot charger typically indicates that the charger is properly connected and charging the device, but the battery is not yet fully charged. Once the battery is fully charged, the light should turn solid green. If the light continues to blink green and the battery does not charge, it could be an issue with the charger or the battery. Try using a different charger or testing the charger on another device to see if it is working properly. If the issue persists, contact Segway Ninebot customer service for further assistance.

When a capacitor is fully charged, no current flows in the circuit. This is because the potential difference across the capacitor is equal to the voltage source. (i.e), the charging current drops to zero, such that capacitor voltage = source voltage. It is vital to have a look at what occurs even as a capacitor is charging and discharging. It is the capacity to manipulate and is expecting the fee at which capacitor expenses and discharges that makes capacitors truly beneficial in digital timing circuits. When a voltage is located throughout the capacitor the cap potential can't upward push to the carried out price instantaneously. As the fee at the terminals builds as much as its very last price it has a tendency to repel the addition of a similar fee. The fee at which a capacitor may be charged or discharged relies upon (a) the capacitance of the capacitor) and (b) the resistance of the circuit thru which it's far being charged or is discharging. This truth makes the capacitor a totally beneficial if now no longer important element withinside the timing circuits of many gadgets from clocks to computers. In phase-headed Capacitors 1 we in comparison a charged capacitor to a bucket with water in it. Now, if a hollow is made withinside the backside of the bucket the water will run out. Similarly, if the capacitor plates are linked collectively thru an outside resistor, electrons will go with the drift spherical circuit, neutralize a number of the fee on the opposite plate and decrease the cap potential distinction throughout the plates. The identical thoughts additionally practice charging the capacitor. During charging electrons waft from the terrible terminal of the electricity delivered to 1 plate of the capacitor and from the opposite plate to the effective terminal of the electricity delivery. When the transfer is closed, and charging starts, the fee of a waft of the fee is large (i.e. a massive modern) and this decreases as time is going with the aid of using and the plates come to be greater charged so "resisting" any similarly charging. You must realize that the addition of a resistor withinside the circuit in collection with the capacitor ONLY influences the TIME it takes for the capacitor to come to be completely free and NOT the EVENTUAL POTENTIAL DIFFERENCE ACROSS IT - that is constantly identical and identical to the capacity distinction throughout the deliver. (Figure 1) Those of you who have a flash lamp constructed into your digital digicam will recognize that it takes some seconds to fee - that is due to the fact the power for the flash is being transferred to and saved in, the capacitor in the flash unit and this takes time to come to be completely charged. If we recall the instance of a capacitor related to a hallmark lamp we must realize that if a capacitor changed into used to mild it then the lamp could get slowly dimmer because the capacitor discharges because the capacity distinction throughout it falls and the modern flowing receives less.

It sounds like the file you are trying to open is a large MPEG video file. You can try using a video player such as VLC to open the file. VLC is a free, open-source video player that can play a wide variety of video formats, including MPEG. You can download VLC for Mac from the VideoLAN website: https://www.videolan.org/vlc/download-macosx.en-GB.html You can also try using a video editing software such as iMovie (comes pre-installed on mac) or Adobe Premiere Pro, they should be able to open and edit the file. It's also worth mentioning that the file extension .009 is not a common video format, it might be a temporary file that was created during the recording process and you may need the other parts of the files to be able to open it.

The silver knob above the leg knob on a Bell and Howell 455A movie projector is the speed control knob. This knob is used to adjust the speed at which the projector runs. The projector has three speeds: 16, 18, and 24 frames per second (fps). This knob can be used to match the speed of the projector to that of the film being projected. The user can switch between the speeds depending on the format of the film they are using. When the projector is set to the right speed, the motion in the film will appear smooth and fluid, with no stuttering or jerking

This program may help. Recuva (pronounced "recover") is a freeware Windows utility to restore files that have been accidentally deleted from your computer. This includes files emptied from the Recycle bin as well as images and other files that have been deleted by user error from digital camera memory cards or MP3 players. It will even bring back files that have been deleted from your iPod, or by bugs, crashes and viruses!

• Put the memory card into an USB card reader and plug it into the USB port in your computer, then run the Recuva program.
• Simple to use interface - just click 'Scan' and choose the files you want to recover
• Easy to use filter for results based on file name/type
• Simple Windows like interface with List and Tree view
• Can be run from a USB thumb drive
• Restores all types of files, office documents, images, video, music, email, anything.
• Supports FAT12, FAT16, FAT32, exFAT, NTFS, NTFS5 , NTFS + EFS file systems
• Restores files from removable media (SmartMedia, Secure Digital, MemoryStick, Digital cameras, Floppy disks, Jazz Disks, Sony Memory Sticks, Compact Flash cards, Smart Media Cards, Secure Digital Cards, etc.)
• Restores files from external ZIP drives, Firewire and USB Hard drives
• It's fast, tiny and takes seconds to run!

Go to these WEB sites to down Recuva http://download.cnet.com/Recuva/3000-2242_4-10753287.html www.filehippo.com/download_recuva

If there is no obvious battery compartment on the camera or any visible screws DO NOT try to open it up. Some of these cameras are built as "sealed units" meaning once they become faulty you just replace the whole thing. These cameras are clipped together with pegs moulded into the outer case. If you force the case open they tend to break off and can't be fitted back together and are no longer weather proof making the camera useless.

It sounds like your camera, the Nikon Coolpix MN35Z, is experiencing an error with the mode dial. The "mode dial indefinite" error message indicates that the camera is unable to recognize the position of the mode dial. This can be caused by a variety of issues, such as a malfunctioning mode dial, a damaged mode dial, or a problem with the camera's internal components. To troubleshoot this issue, you can try the following steps:

1. Make sure the mode dial is not damaged or stuck. If the mode dial is stuck or damaged, it may not be able to move freely, causing the error message to appear.
2. Check the camera's battery and memory card. If the battery is low or the memory card is full or damaged, the camera may not be able to operate properly.
3. Try resetting the camera. To do this, remove the battery and memory card, wait a few minutes, and then reinsert the battery and memory card.
4. If the problem persists, the camera may need to be repaired by a professional. It is recommended to contact the manufacturer or an authorized service center for further assistance.

An "H" and "F" error code on your washing machine typically indicates a problem with the water heating system. There could be a problem with the water temperature sensor, the heating element, or the control board. Here are a few things you can try to troubleshoot the issue:

1. Check the water inlet hoses for any kinks or blockages that could be preventing water from flowing into the washing machine.
2. Make sure that the water tap is turned on and that there is sufficient water pressure.
3. Inspect the water inlet valve for any damage or malfunction. The valve may need to be replaced if it is not functioning properly.
4. Check the control panel for any error codes or messages that may indicate the cause of the issue.

My ILIVE Bluetooth earbuds are doing the same, I have them charging and the same red light he talked about is blinking I have no clue why and I'm worried I wasted 30 bucks

Puedes descargar el manual para el Moultrie MFH-DGS-L50 aqu?: https://www.moultriefeeders.com/wp-content/uploads/InstructionManuals/MFH-DGS-L50.pdf. El manual contiene informaci?n sobre el uso de la c?mara, el montaje de la c?mara, la configuraci?n de la c?mara, la soluci?n de problemas y otros temas relacionados con la c?mara. Espero que esto ayude.

Hi, please ensure that you've changed between all 4+ camera modes within your camera. If this fails, then you can remove the Sd card and then afterwards remove the batteries. After 1 minute, you can re-insert the batteries back into the camera without adding the sd card and check for the error again. If this fails, then you can re-insert the sd card and check again. Otherwise, you might need to take camera to Geeksquad/Bestbuy for repair. Thank you.

The SD memory card slot is spring loaded, to insert the memory card insert the card into the SD memory slot with the SD card contacts going in first and gently push it in until it locks in place. NOTE if the SD card does not slide into the slot easily then the SD memory card has been inserted back to front, turn the SD card around and insert it again.To remove an installed SD memory card, press the SD memory card and it will pop out slightly then you can then pull out the SD memory card.

The manual says that the stereo microphones are either side at the rear of the flash. Make sure nothing is near them. It also says that it can be affected if the flash is raised. It sounds like a firmware issue, and it is a pity there is no external mic jack socket. https://www.google.com/search?q=nikon+coolpix+l820+video+muffled+audio ..

It is likely that the charger or the battery is not functioning correctly. If the battery is not taking a charge from the charger, then the battery may need to be replaced. You may also need to check the charging cable and port for any damage or corrosion. If the charger itself is not working, then it may need to be replaced. Additionally, you may need to check the internal components of the remote controller for any issues. If the components are damaged or malfunctioning, then they may need to be replaced or repaired in order to get the remote controller working correctly.

It sounds like the battery compartment of your Iota Triceratops may be damaged and in need of repair. Depending on the severity of the damage, there are a few options you can try to fix it.

One option is to try to clean the battery compartment and remove any corrosion that may be present. You can use a small amount of baking soda mixed with water to create a paste, and then use a soft cloth or brush to apply the paste to the affected area. Once the paste has been applied, use a damp cloth to wipe away any excess and let the battery compartment dry completely before reassembling the device.

If the damage is more severe, such as a broken spring, you may need to replace the battery compartment or seek professional repair. You can try contacting the manufacturer of the Iota Triceratops for assistance in finding a replacement part or for information on where to send the device for repair. Alternatively, you may be able to find a replacement battery compartment or repair services through an online retailer or a local electronics repair shop.

It is here https://van-eck.net/en/product/hanimex_1000_dls_instdual_8_user_manual-_languages-_english/ ..