20 Most Recent Optoma HD700X DLP Projector Questions & Answers

Try initialization the High Altitude fan setting in the menu set up. This will increase the cooling capacity and should solve your problem

hi, i have the same problem - did you fix it?

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers, for spare parts and service, and Installation Instructions as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

Or try ebay by description.

I hope this helps.

Hello
if replacement lamp has done, was the lamp timer reset after replacement? and if the lamp is original, there is either a bad lamp or a cooling problem.
Good luck

Question edited for full 'make model (what it is)', optima to Optoma Question moved from Televisions category. You can only change the password if you know the old one. They are password locked to prevent theft. Any on the secondhand market are stolen from workplaces.

manual-optoma-ds316l-en-51.pdf - Beamer-Parts.eu

https://www.beamer-parts.eu > files > desc > manu... PDF Enter new password again and press ". " to confirm. If you have forgotten your password, please contact your local office for support. ? Pass ...

To perform a hard reset on an Optoma UHD55 projector, you will need to locate the reset button on the projector. This button is typically located on the back of the projector, near the power cord. Press and hold the reset button for at least 10 seconds, or until you see the projector's LED light begin to blink. Release the button and the projector will reset to its default settings.

Hi, please check the serial number of the fans that are supposed to be the same. They might be different in some way because otherwise, the error should not have occurred. If the products have the same serial number or similar type of id, then I would take the projector to geeksquad/bestbuy to double check that the new fan was installed properly. Thank you.

Reset instructions according to this https://factory-reset.com/wiki/Optoma_Service_Menu Optoma Service Menu Instructions Most of our Optoma Service Menu methods require the use of an original remote, typically you can not do it with just the buttons on the front of the set. If you no longer have your remote or have damaged it, we recommend that you purchase a Optoma Remote before trying to enter the service menu. Method 1

1. Press simultaneously {UP} & {ENTER} buttons twice.
2. Press simultaneously {LEFT} & {ENTER} buttons twice.
3. A Service Menu will be displayed
   1. Then to access the Full Service Menu: Press the {UP}, {LEFT} & {DOWN} buttons once.
4. To exit, turn the Projector Off.

Method 2

1. Press the {UP} {UP} {LEFT} {LEFT} buttons.

Method 3

1. Press the {POWER} {LEFT} {LEFT} {MENU} buttons.

Method 4

1. Press simultaneously the {RE-SYNC} {ENTER} {SOURCE} buttons on the Projector.

Method 5

1. Press the {POWER} button.
2. It will show: "Power Off" or "Picture Mute".
3. Then press the {LEFT} button 8 times slowly.

Method 6

1. Press {MENU} {6} {1} {9} {MENU} buttons.
2. To exit the Service Menu: Press {MENU} {6} {1} {9}

Ask these guys, saw the have reviewed UHD50: https://projectortop.com/optoma-uhd50-vs-uhd60/