Top 20 Sylvania SDVD7015 7 in Portable DVD Player Questions & Answers

check that you have the battery in the correct way if it has batteries like AA , AAA or what ever the negative terminal of the battery goes against the coil spring so if you have them all facing the same way, that may be why they are not charging the screen shutting down at this stage would be cause the batteries are flat of course you could always bet new fully charged rechargeable batteries and put them in correctly to see if the rest works

Is this a copy of a movie?

Region code can be changed. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/

Get a Q-Tip and rubbing alcohol, gently clean the laser lens and allow several minutes to dry. If there is no change the whole laser pickup assembly will need to be replaced, not cost effective to repair, cheaper to replace the player.

Check and replace the optical pickup unit. For more details type in this site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search or press Enter. It is an electronic equipments service help site.

Note the position of hyphen in between words in site name. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.

Pull up older posts.

You can locate this site name, either at the bottom part of first search page, or at the top of second page.

Detailed descriptions are there to help you.

Sometimes, clicking on advertisements by the side and bottom of each post might help you to get details about the availability of spare parts; price and more.

I have serviced a lot of portable dvd players, when the adaper shorts in the manner you describe it usually takes out the pcb board making it not cost effective to repair, far cheaper to replace the whole unit.

In most cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.

The main motor will not work in some cases as unless the tracks are read the drive motor will not work with signal from the processor. Also in some cases the central motor base can shift and so the distance to the disc can be more resulting in low detection. You can pull up the spindle to come closer. Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye.If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault.If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board

Tries websites like Amazon.com,Ebay.com to buy a replacement of the AV cable.

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_cfv

hi,
ur dvd players laser pickup unit or the spindle motor may be get damaged. first of check the spindile motor . just try to rotate with ur finger it should freely run for a moment. if feel tight ,first replace the same. after that, if the problem remains u have to replace the laser pickup unit.
ok

Hi,
Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__6yt3e

No, because screen casting wasn't invented and it isn't a Smart television. Time for a new one.

Here are some troubleshooting tips to try. However, as it is an older set, if these tips fail, the cost of a repair at a shop might exceed the value of the TV. In short, a new TV may be in the works. Cross your fingers. One of these tips may work. Let's troubleshoot the issue and try to get it working: If you are using a remote, check the batteries in it. If you are using several remotes with it, try the alternative remote. Sometimes there is a glitch affecting the remote for a Roku where it won't turn on the TV other than a powered black screen and you have to use the other remote to turn it off and back on and then the Roku screen pops up. I have not sorted out why. Check Power Cord and Connections: First, ensure that the power cord is securely plugged into both the TV and the electrical outlet. If you suspect a faulty power cord, consider trying a different one. Reset the TV: While most Sylvania TVs don't have a dedicated reset button, you can perform a manual reset: Unplug the TV's AC adapter from the electrical socket. Press and hold the Power button on the TV for 20 seconds. Plug the AC adapter back in and turn on the TV. Check Audio/Video Cables: Inspect the audio/video cables connecting your TV to the satellite or cable receiver. Ensure that the color-coded prongs match their respective connecting points. Correct any mismatches (e.g., white cable into a red port) by reorganizing the prongs. Inspect Coaxial Cable: Look for the coaxial cable on the rear side of the receiver, attached to the port labeled as ANT IN. Confirm that the connection is firm; a loose coaxial connection can cause display issues. Tighten the cable by pinching the silver band on the end and rotating it clockwise until secure. Check for Interference: If distortion continues on the TV screen, consider nearby interference. Power-hungry appliances can cause electronic interference, affecting display quality. Visit a Repair Shop: If the above steps don't resolve the issue, you may need professional help. Some technical faults, such as a blown fuse or faulty capacitor, require expertise in dismantling and soldering. If uncomfortable with such tasks, consider visiting a repair shop

1. Auto Code Search:
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on your Philips remote until the indicator light stays on.
   • Press the "TV" button on the remote to set it to control the TV.
   • Press the "Power" button repeatedly until the TV turns off.
   • Press the "OK" or "Enter" button to save the code.
2. Manual Code Entry:
   • Find the code for your Sylvania TV in the Philips remote control manual. If you don't have the manual, you may be able to find it on the Philips website.
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on the remote until the indicator light stays on.
   • Enter the code using the number buttons on the remote.
   • Test if the remote now controls your TV. If not, repeat the process with a different code.
3. Try Common Codes:
   • Some common Sylvania TV remote codes for Philips remotes are 0810, 1684, 1886, 2183, 1081, 1172, 1196, and 2049. Try entering these codes manually.

it is a very simple TV, is TV connected to cable? Here is link to manual copy and past download and save for future reference. It is very old and has CRT not LCD. https://www.manualslib.com/manual/776815/Sylvania-Sylvania-Ssc092.html#manual

More likely you hit the Source / Input button and lost the signal. Press it again until it comes back.

By typing the correct pin or activating a factory reset.

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote 4-Digit Sylvania TV Codes for Universal Remote

• 0002.
• 0008.
• 0030.
• 0054.
• 0068.
• 0096.
• 0171.
• 0321.

More items... • Jan 1, 2023

RCA Universal Remote Codes For Sylvania TV - GenTwenty

The Sylvania LC260SS2 has a eArc option called fun-Link. This only works with other fun-Link compatible devices. See https://www.manualslib.com/manual/325827/Sylvania-Lc260ss2.html?page=14#manual . (Sylvania TVs are made by Funai Electric.) It may not work with non-Funai electronics. I hope this helps. Cindy Wells