20 Most Recent
Mitsubishi VS-55609 55" Rear Projection Television - Page 4 Questions & Answers
Fan noise running when tv is on
Mitsubishi rear projection DLP keeps turning off and shutting down. The red light then turns on for a while and then turns off. TV can be turned on again and works fine until a random shutdown occurs again. No fault codes are stored. No blink codes. No airflow warning messages. The original thermal sensor was replaced 8-1/2 years ago. Fans are completely clean and running smoothly. I fixed this problem by replacing the 8.5-year-old thermal sensor. The problem is gone. Mitsubishi thermal sensor part number 299P313010A. Manufacturer part number YS11A95B-C6. Do not use the connector plug. Strip the wires, and hard wire and solder the 2 connections. This might also apply to these models: WD-52631, WD-57731, WD-57732, WD-65732, WD-57831, WD-65831, WD-Y57, WD-Y65
Mitsubishi WD-73838 fan makes grinding noise
Mitsubishi WD-73838 Projection TV
all PC and TV and projectors all those have fans.
for sure thing that run faster, than say notepad
and yours does fan all fans suck in piles of lint
learn to clean it or have shop do it.
if ignored the fan jams up with lint, and stalls or makes noise (bad)
and stalls. all things with a fan does that.
and causes overheating damage that wrecks all elecronics with fans.
it needs service do get serviced
or rear the service manual
or learn to clean it your self.
that was 3 answer, YOU CALL
Mitsubishi TV not working.
Your TV is stopped working and it would be more cheaper to purchase a new TV than to try and repair the TV that is not working anymore.It could be the power supply inside of the TV is not working.
Not finding what you are looking for?