20 Most Recent John Deere 22HP VTwin 48" Riding Mower - Page 4 Questions & Answers

Sorry, a new battery is in the works.

The problem with JD manuals no free ones. Type in manual lx135 on Goggle. You will find site to buy one.

With a manual

When it starts to cut out try removing the fuel cap. If the fuel cap is not venting the fuel tank will create a vacuum and fuel will not run through the fuel lines. Daniel.

First thing to check would be the tire pressure. I usually run 12 psi in the front and 10 psi in the rear. Next would be to check the deck bearings. If the bearings are bad in either spindle the blade will cut uneven. Easiest way to check bearings is to grab ahold of the blade and try to rock side to side. If all is ok there the deck will need to be leveled. John Deere makes a blade leveler which can be picked up at the local dealer for a few bucks. Let me know if you have any other questions or if this helps, Daniel.

When changing spindles I always add at least 7 or 8 pumps of grease from the grease gun. Usually John Deere does not ship anything with grease. Daniel.

Hello,

Normally they come together already pregreased , How ever what I do, sense i don't really trust parts that pregreased, I try and get some more in there if I can. If not, you should be alright, sense they are put together complete, they come greased. Thanks Mike

HI,Here is a belt diagram

Hi, your problem is caused by the transmission over heating. Remove the battery and battery carrier and clean all grass and debris from the hydro cooling fins and fan. Hope this is helpful, regards Phil.