20 Most Recent
Ricoh Aficio 2015 Copier - Page 6 Questions & Answers
Sc552
SC-552 Fusing temperature warm-up errorThe fusing temperature rises less than7 degrees in 2 seconds, and thiscontinues 5 times consecutively.The fusing temperature is not detectedin 25 or 35 seconds.Possible Cause: • Fusing thermistor defective or out ofposition• Fusing lamp open• Power supply board defective
@wAm getting a sc 302
Hello!
When you change the PCU did you conect the blue plug????
If this is not the case remove the PCU again and if you look deep down you will see a metalic shaft. Clean it and install again the PCU.
Hope this helps you
I added the toner in
how many copies on the machine?
to find out press the user tools
goto counter
if it is over 60,000 you will need a new PCU
you may also need a new toner hopper (toner cartrage holder)
How do I set this
Hello!
You can take a look in to the manual. You will see that information step by step.
It is much easier because you will see pictures and screen shots.
If you still can not do it reply to me. I will be glad to help you
Solution for 12320 problem of recoh
i faced this problem and ihope to help yo first be certain that your windows xp service 3 or 7 exception sp2 didn't work and be sure that ip and subnet musk and default gatway corresponding with your pc then dis activate antivirus and fire wall be certain that blocked if it's still appear that become aprotocol problem need it technician i will wait your respond good luck
Not finding what you are looking for?