Top 20 Dell AllinOne Multifunctional (v515w) InkJet Printer Questions & Answers

https://www.dell.com/support/article/us/en/04/sln149159/troubleshooting-the-dell-v515w-all-in-one-inkjet-printer?lang=en

It may have a date code ill not allow you to print without updating/replacing the cartridge. I got rid of hy HP for the same reason.

Did you use a brandname ink cartridge - or is it a knock-off brand? If it is a brand name - then the cartridge is most likely defective. If it is a knock-off brand - some printers do not recognize the electronic in the cartridge and therefore don't see it as one being installed. This may also help Dell 922 AIO Black Ink Cartridge Missing Message If you need further help, reach me via phone at https://www.6ya.com/expert/michael_e7c2c48c6e65f808

Not sure what code you are talking about. You need to use a cable and the install disk to set this up. Then you are prompted to switch to wireless.

On the off chance that your Dell Printer isn't working properly or you're facing particular issues setting up your printer and you need capable master authorities, this is the time when we step in. Dell Printer Customer Care Phone Number +1-833-260-7367 we have given you the best dell customer administration. exactly when you standing up to any specific issues in dell printers. If you and your sidekicks need and approach the best for dell printer bolster administration, you simply need to https://easysupportnumber.blogspot.com/

The printer's IP address most likely needs to be changed.Check the Belkin's IP address range (it maybe 192.168.2.***) and configure the printer's IP address accordingly.

I have a Dell v515 on Windows 7 64bit. I just figured out how to bypass the printer chip counter. Start --> Control Panel --> Devices and Printers. Right click on your printer, choose Printer Properties. Go to the Advanced tab and click the Print Processor button. Choose winprint for the print processor and NT EMF1.006 for the default data type (I found this choice has the best print results). This does not reset the chip, but just allows print jobs to be sent to the printer without having to go through the Dell software. I am not sure how this works with scanning or copying. My guess is that there may be times that you have to change back to the original Dell print processor and LEMF for the default data type. Hopefully this works for anyone reading this. Good luck!

Try to see if your mechine has a paper eject button, to Unjam ..try to see if you can still feed paper to push out the jamed paper...

Please follow the following steps.

1) Turn off the printer.

2) Shutdown the PC to which the printer is connected.

3) Remove the USB/Serial cable through which the printer is connected to the PC and reconnect it back.

4) Now switch ON the PC(only PC and not the printer)

5) Let the PC boot up and login to windows.

6) Now switch on the printer, PC should detect the printer automatically now. Now you will be able to print.

Try running Delete Print Jobs to remove any stuck print jobs in the queue.

Can you copy a document under the glass? B&W and color?

What is the correct model of the printer? V505 or V515? Dell does not have a V510.

You can try reinstalling the printer using the instructions located at...

Dell V505 & V505w All-In-One (PRODUCT) RED™ Printer owners thread (W7)

Dell V515w Wireless All In One Printer - (RED) owners thread

Virus programs and firewalls will block communications.


Rick

Turn the printer off.
Disconnect the AC power.

On your computer, click Start
Click Control Panel
Click Printers
Select the Dell Printer
Uninstall it
Restart your computer
Turn the printer on
Allow the computer to reinstall the device-device for the printer.
Print a test page.

No, this should not be a problem. It may be because this printer can be installed with the usb cable and wireless. There a few models that show up like this.

Rick

Are you printing directly to your printer or printer in a network?

If you are printing directly, the problem is the Print spooler maybe stop.

To restart this, follow this procedure

Go to START MENU
Choose Commamd prompt, right click mouse and run as administrator (You should be in this command C:\WINDOWS\SYSTEM32- If not type this command when you in the dos command prompt "CHDIR C:\WINDOWS\SYSTEMS32 and press enter")
Type the letter "cmd"
Type the word "net stop spooler"
Exit
Go to C: drive
Choose to Windows Folder
Click show content
Choose system32 folder
Choose spool folder
Choose printer
And delete all printing jobs pending
Again go back to CMD window and type the word "net start spooler"
Restart your computer and must also turn off your printer and then switch it on.
It will work fine right now
I hope it helps you
Please let me know it you need more help. Regards

My first guess is that the cartridge is defective. Most modern cartridges had a small chip in them that communicates with the printer, though I can't be certain on this model, I'd start by exchanging that one or trying another one you may have.

Click on the printer icon in te tak bar. Open the printing queu and then delete all the pending tasks. Alternatively, from the control panel, right click on the printer and clear the queue

how can i get my printer to work

Visit Oc? TDS450 downloads, drivers, manuals, software, firmware and safety documents (cpp.canon) Select driver then select operating system windows 10 and download the driver

Remove power to it. Reinstall the software. Then plug it back in.

They aren't worth fixing. You can find comparable to dell's for half of the price. They are everywhere. Just make certain it is for dell 1700.