20 Most Recent Dell AllinOne Multifunctional (v515w) InkJet Printer - Page 8 Questions & Answers

Sgvendraa, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Goplyx and wextryxx

Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

Perform hard reset to clear up electronics. Also check for cartridge failure(s).

no but you can replace the ic chip on the ink cartridge seehttp://farbtoner.com/resetchip-fuer-toner-schwarz-komp-fuer-dell-2150-2155-p-3781.html?language=enorhttps://www.amazon.com/TM-toner-331-0719-331-0716-331-0717-331-0718/dp/B00NM2CW2Wthis video shows you howhttps://www.youtube.com/watch?v=X8lGSaz6zO4

its 15 years old what do you expect, it will need full cleaning and service. and new cartridges.

It is 15 years old, and that is old for a printer. first off Dell has no parts lists, they do not do that like HP.com does. so we have to buy them used, from ebay. what you find there is luck pure luck. toner yes, other parts no. at dell.com I don't think dell will take a service call on such old IRON. https://www.dell.com/support/home/us/en/04/product-support/product/dell-5100cn/docs

did you read the manual first, no 2 printers do this the same way. go to dell.com and read the manual? here they are , and it is there what to do. RTM https://www.dell.com/support/search/us/en/04#q=Dell%203100cn&sort=relevancy&f:iuxType=[Manuals%20%26%20Documentation]&f:langFacet=[en]

top cause on all printers is filth, paper dust and chunks we clean all paths with due diligence. or read here. (btw first google hit, eva google? https://printcopy.info/?mod=erc&brand=Xerox&model=WorkCentre%203045&code=024-963

ask dell this, dell.com tricky URL, LOL join, free and ask> https://www.dell.com/community/tag/Printer/tg-p/category-id/English or https://www.dell.com/community/Printers/What-does-3115cn-error-code-117-363-mean/td-p/4480746 see your not the first or the last. read there ,search there or post.

cleaning printer is not fun or easy. use bright flashlight and look deeper and use can-o-air and blow out paths, or get the printer serviced in a shop?

Which Dell 113x do you have? There are the Dell 1130 and Dell 1130n Monochrome laser printers that do not have a scanning unit. See https://www.dell.com/support/home/us/en/04/product-support/product/dell-1130/docs . If you have these, you can't scan. If you have an all-in-one, perhaps the Dell 1135n multi-function laser printer, https://www.dell.com/support/home/us/en/04/product-support/product/dell-1135n/docs , see below. Dell also lists a B1163 multi-function printer. See Dell support for the printer list of US printers: https://www.dell.com/support/home/us/en/04/products/electronics_accessories/electronics_accessories_printers?app=products&~ck=mn . In general, for multi-function printers, the unit must be in a ready to print state. (Out of ink messages will stop the unit from scanning.) Next the full software package should be installed before connecting the USB cable, if that is used. If the OS finds the drivers, you may only get the printer drivers. Next two-way communication must be allowed. For a USB cable, don't use a cable longer than 6' and replace it if there is a communication error. For a network connection, make sure that the firewall is set up to allow the communication. Finally, try to launch a scan from the computer, using the software that is part of the full package. You will need to have a scanning monitor launched during boot to look for button presses on the scanner. This monitoring software requires some setup before it correctly responds to the button presses. For Windows, this is the Dell Scan and Fax Manager (on the 1135n). You need to enter the Properties section for the printer. Then go to the Set Scan Button tab and use the Available Applications list to move the desired applications to the Front Panel Scan Destination. You should also set the file type here. In the Scan Property section, set the default destination for scanned images, the standard resolution, and other items. Also make sure to set the type of connect in the Change Port tab. For the documentation on the scanner for the 1135n, see page 47 on at https://downloads.dell.com/manuals/all-products/esuprt_printers_main/esuprt_printers_mono_laser/dell-1135n_user%27s%20guide_en-us.pdf . I hope this helps. Please add a comment if you have a different all-in-one printer. Cindy Wells

I EARN $400 4 HOUR ,Did you know there's a "deep detox" you can do first thing in more fat? And the good news is It only takes 13-seconds! please don't copy"?­" In Url Thankswww.now.payes12.com? please don't copy"?­" In Url Thanks

Your message does not qualify as a question or query for a problem, try somewhere else Your message qualifies as SPAM

Your message does not qualify as a question Your message qualifies as SPAM

Your message qualifies as SPAM

Your message does not qualify as a question or query for a problem, try somewhere else Your message qualifies as SPAM

This printer is 9 years old and it is likely the imaging components have warn-out.

Sounds like your printer needs service.

Try downloading the latest software and drivers from the Dell support web site for the version of Windows that you are using, and install them.