20 Most Recent
Cisco Linksys E1000 WirelessN Broadband Router Network Routers - Page 6 Questions & Answers
How do I find the wireless password?
Push in the reset button on the back of the router, just to the left of the power port, for approximately 10-15 seconds, then wait 30 seconds, you will then be back at factory defaults. you then login to the router by typing
http://192.168.0.1 into your browser, username: admin password: admin, then goto the wireless security settings page, and set the password to whatever you like.
How do I reset the password on my router E1000
Push in the reset button on the back of the router, just to the left of the power port, for approximately 10-15 seconds, then wait 30 seconds, you will then be back at factory defaults. you then login to the router by typing
http://192.168.0.1 into your browser, username: admin password: admin
Just bought an E1000 off ebay and previous owner
simply push in the tiny reset button on the back near the power jack, with a small pin or paper clip, for about 20 seconds, this will reset back to defaults, of 192.168.0.1 and username : admin password: admin
Linksys E1000 has been in
Time to replace the router, 2 years is the average lifespan. The buffer/memory starts to go bad, and can't respond like it is supposed to.
I have 3 PC's running
Make sure you select private, or home network, not PUBLIC! if you select public it will not access the internet
I need to reset my E1000, I forgot my password
Look for indentation next to where you plug the power in on the back, using a small object such as a needle or paperclip, and hold in for ten or more seconds. then wait ten seconds this should reset it to factory defaults.
How to configure router to other computer without
For a computer to connect to router there is no need for internet.
If your router is active and functional any computer in its range can be connected with wires by ethernet port or wirelessly with wireless card.
If your computer has wireless card it will recognize the Linksys router and you can connect automatically unless you have a password set for wireless security.
If you need to log on to the router and change settings first step is connect your computer to router wireless or wired then open web browser like Internet explorer or firefox. type 192.168.1.1 this will open a dialogue box for user id and password leave user id blank and type admin in password line.
once you are router page you can configure settings on router.
If you need help with setting up router post the question again! good luck
Where is wep key
when you log on to router page by 192.168.1.1
Click on wireless button on top
this will open new page. look for security and click on that button
on this page you can find the key
I have a problem with a laptop computer that is
Go to the control panel and click on user accounts highlite the guest account and on the left of the screen you will have a list of options click on delete password and that should do it for you
Have problem connect
What kind of proble you have ? connectivity issue with your local network or connectivity isssu ewith outside i mean external network??
-where can i find my cisco password?
-what is my
You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Let me know if you need further assistance. Thanks for using FixYa.
For beginners-how do i connect the linksys e1000
The modem will plug into the router, it should come with a cable for this, there will be 5 ports on the router, one will be labeled as internet most likely , this is the one you use, the other 4 will be numbered and you can use any of these to connect your tower. the wireless should work automaticly for your laptop, but if you want to make it a secure network, please contact me directly and ill walk you through it.hope this was helpful
Manual for linksys e1000 how do I connect router
You can either connect an Ethernet cable from the router to the built-in Ethernet jack that most machines have OR you can install a wireless (Wifi) adapter in your computer and follow the instructions to set up a wireless network...
I purchased and install the new Linksys E1000. I
You can uninstall it from start menu->control panel ->add remove programs for vista or win7 go to start->control panel->program and features.
Then uninstall it's software from there you can also configure router without software with below method.
You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method.
Then click on WAN settings set it as your internet service provider settings enable DHCP
Then click on wireless and enable it.
. Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.
Not finding what you are looking for?