20 Most Recent Belkin Basic Wireless Router - Page 4 Questions & Answers


After login from network setting you can find the SSID number...


The easiest way to find your SSID is to look on your wireless router. The default SSID -- the one it came configured with from the factory -- is always located on the bottom or rear of the router.

***If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

Belkin Basic... | Answered on Jan 16, 2013


when it is buffering? While watching videos or what? describe it

Belkin Basic... | Answered on Jan 12, 2013


To what ? from what? Using what?

Belkin Basic... | Answered on Jan 12, 2013


  • Hook up printer to network.
  • Give the printer a static IP address outside of DHCP scope. (If your network address is 192.168.0.0 typically any address from 192.168.0.1-50 will be. 192.168.0.1 will usually be your router.
  • Install the printer on computer with appropriate driver and install as a network printer, not local.
  • Enter the IP you gave the printer.
  • Done


If your printer doesn't have networking capability let me know and I can explain setting up a printer share.

Belkin Basic... | Answered on Jan 11, 2013


Your laptop still insists on using the old password that's why it can't connect. Go to Control Panel > Network and Internet > Network and Sharing Center > Manage Wireless Networks. Select your router's SSID. Right click on it and change Properties > Security > Show characters. The old password that you forgot should appear. You may then change it to the latest one.

You may also click on the wifi signal icon on the lower right corner of your Taskbar, right click on the router's SSID, select Properties > Security > Show characters to reveal the old password you forgot and change it to the latest one.

Belkin Basic... | Answered on Jan 03, 2013


The user is called SSID and the password is called the key. Look for that info on the router web admin page under wireless.

Belkin Basic... | Answered on Jan 01, 2013


To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and then power for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. https://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- https://www.fixya.com/support/r3559128-wireless_router_security

Belkin Basic... | Answered on Dec 30, 2012


Wireless devices do not need drivers.

Belkin Basic... | Answered on Dec 21, 2012


Hold reset in till it cycles. This will clear all custom settings.

Belkin Basic... | Answered on Dec 14, 2012


This referred to as Virtual Servers in the Web Admin.
This site is for gamers, but use it as a demo. Its the same principle / steps if you need to setup some other application.
Choose your Belkin model (but I think they are all the same), then any game to see steps and screen shots.
http://portforward.com/english/routers/port_forwarding/Belkin/

Belkin Basic... | Answered on Dec 12, 2012


You didn't mention the Model but here's a setup guide: http://www.belkin.com/support/dl/man_f5d8235-4_pm00736_0708.pdf

Belkin Basic... | Answered on Dec 10, 2012


Hi,

To avoid the pop up Kindly right click on the Belkin router monitor Icon in the system tray & click exit. To avoid it happening all together, Go to control pannel & click on add / remove programs & unistall the router monitor software. The router would still work in the absence of the router monitor software.


Thanks..

Belkin Basic... | Answered on Dec 10, 2012


Hi here is the answer for your question:


1. We need to establish a direct connection bit-win your router and your pc or laptop using the UTP cable one side of the cable must need to connected to one of the port in the back side of your router the other side to your lan port.


2. open explorer or any browser you using and type on the top search bar 192.168.2.1 this is the address of your router press enter and you will contact your router set up page.


3. after you must go to wireless security that appera in the left side of the page, after that you will able to change the password of your wireless security.


more question let me know


Techbelkin

Belkin Basic... | Answered on Nov 18, 2012


It is a security mode and may be your log on password.

Belkin Basic... | Answered on Nov 12, 2012


No drivers are required since routers are not installed but are administered. Connect the ISP modem to main uplink port. Then connect pc to any other port. Done!

Belkin Basic... | Answered on Oct 24, 2012


you have chosen the encryption option WEP instead of WPA/WPA2.
go back one screen and change that and you'll be able to enter letters.

Belkin Basic... | Answered on Oct 17, 2012


The router's encryption (password) is configured in the router's wireless settings.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. https://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- https://www.fixya.com/support/r3559128-wireless_router_security

Belkin Basic... | Answered on Sep 11, 2012


Both the routers are having the same default IP addresses that's why they are conflicting.
Put only one router in the switch connected the a PC on the same LAN.
Open your browser and put the default IP address (like for most of the routers 192.168.1.1 or 192.168.0.1), hit enter and give the login ID and password (in most of the cases, admin/password orv admin/admin), go t configuration> IP settings> Static IP Mode> Change the IP from 192.168.x.1 to 192.168.x.2 (or any other other number except 1 and <254).
Save and reboot.
Now enjoy both routers plugged in simultaneously in the same LAN. :)

Belkin Basic... | Answered on Sep 04, 2012

Not finding what you are looking for?
Belkin Basic Wireless Router Logo

516 questions posted

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

am now connected

  • Computers & Internet
Loading...