20 Most Recent Orion STV2763 27" TV - Page 7 Questions & Answers

 I programmed my PHILIPS Universal with code 0115 then the subtitle (CC) button worked no problem.I am sure any Universal remote with the subtitle button that u can program will work. My Comcast Remote would not work.Did This Help ?

I need the name and model number of the remote control, please.

I'm sorry. The STV2763 is not digital. If you use an antenna, you will need a converter box for this tv. I hope this information helps you.

Hi, Yes you are in Luck! This model has an ATSC tuner which means it will receive digital channels just fine. Hope this Fixsya!

the difference is that antenna has showers, small spots on the screen, if there is no spots, indicates that you are not on antenna.
av dont have spots on the screen.

this sweeping is suppose to done on the channel selection button

codes are 0236,0179,0463

codes are 0236,0179,0463.

codes are 0236,0179,0463

open the tv tension your button,
if its broken use arodite,
or soldering if desoldered

that indicates that the amplifier is fine, the problem is that sound on a channel is combined sound and picture signals,
you can fine tune a channel,
if that is happening on all channels, a tv is suppose to alingned with a signal generator

get a magnet and pass it on the tv screen while off, pass it from corner to corner slowly,
on all the screem

i have three orion codes. 0115  , 0713 , 0105 .  Did these help ?

hi there, maybe you touch someting at the remote, try to experiment the bottons until it work, if still same problem, you have an amplfier section problem, test the speakers, some parts at the amplifier section. ty

u will require the orignal remote for this .but you can try pressing the ----CC----- button on the remote which you have.pointing it towards the tv screen. thanks.

The SAP must be turned off and you must have the original remote apparently. I would do a search for Orion customer support and get a remote.

I think my two year old grandson plug in the audio in cable into the earphone jack in front of the tv causing the problem. When my daugther unplug it the volume worked.


Thank You aragon1234

if you have a menu button on tv shoul be able to do it there after you push the menu button then use the up or down button for selection then the volume up or down to ajust then menu to exit. Now if no menu button sometimes you can push the up down chanel button at the same time and get into the menu. Hope one of these works.

I have lose my remote and I have parental code lock n Iam using my cable remote, but can not key my code n cable remote to deleted parental off.Please help me

you have to make sure that if you are using external/additional speakers that you keep them away from console. I had a similar problem when I install a surround sound system in by bar and one of the speakers was very close to the TV. A good friend of mine walked in and said "if you want to get rid of that picture problem and save the life of the TV you had better move that speaker." It has to do with the magnets in the speakers.

You must have the original remote. Do a search on the net for Orion customer support toll free number