20 Most Recent Ryobi 18volt 12" Cordless Drill Model P206 - Page 5 Questions & Answers

Currently its almost to buy a complete new gear box for only 1 worn gear shaft can it be because nowadays much brands deliver only complete gear boxes depending on which model and or brand . there is an gear-shaft worn in the box Milwaukee has also for most models complete gear boxes , Makita Panasonic Hitachi deliver for most models separate parts. I dont know how it is for Ryobi in your Country.

Your drill needs to be dismantled and the problem discovered. Know that these modern tools are not always repairable, but you can at least try. One reason for the last sentence is parts are not readily available, particularly if they are made in China. God bless your efforts.

From your description the battery is probably faulty. If the batteries are still quite young it is possibly just one cell and while Ryobi don't refurbish batteries there are companies dotted around that do. If it is a nicad battery, Ryobi told me just a couple of days ago they no longer supply nicad replacements and expect everyone to upgrade to lithium, which means also buying a charger.

more of a problem that washing underneath it indicates more of a wiring connection problem or water in the battery connections or controls

yes it can all . do not buy nicad bttery

if no output from charger then charger has failed

you can but it will take longer to charge and prob will be at 16 volts give or take 1 volt.

go to ryobi and see if the switch is available.

take back to HD and exchange it for a new one.

https://www.google.com/search?client=firefox-b-1&ei=TEzXWpi8J4XCjwTvl4i4DA&q=ryobi+lawn+mower+how+to+remove+battery&oq=ryobi+remove+battery&gs_l=psy-ab.1.0.0i7i30k1j0i8i30k1l9.13444.15186.0.19160.5.5.0.0.0.0.108.528.0j5.5.0....0...1.1.64.psy-ab..0.5.524...0i8i7i30k1.0.j0Ysgl2B_gY

Do you have a second battery, if so try it? https://manuals.ttigroupna.com/system/files/5005/original/OP140_397_trilingual_03.pdf?2017

There are replaceable parts for this unit. It may cost more to to Ryobi and back plus parts and labor.

they are for the charger to know the voltage in the battery to turn on or off charging. some just need 3 connections and the 4th is just a dead connection. or can be for location only so you don't put the wrong battery in. as they do other voltage batteries that look the same fitting.

Cost more to repair than the tool cost. buy a new one.ifyour battery is any godd they will work in new one. https://www.ereplacementparts.com/ryobi-p230-18v-impact-driver-parts-c-7931_8058_8060.html

Take it back to the supplier as it will be under warranty

reveres thread , look for slot on shaft just below chuck , hold with wrench , may need a big pipe wrench too break loose

problem in the saw connections or switch

Green light indicates fully charged. If not the case then unplug hold trigger in on position to drain all components then while holding the trigger in on position plug the charger in. If this fails it will need repair.

You mean one battery for all if so battery pack faulty if it does not work for any tools

hi I recommend 3-5 amps