7701V Responder SST Remote - Answered Questions & Fixed issues
I just purchased a 2007
http://www.directeddealers.com/manuals/og/viper/G5301V_05-06post.pdf
the 7701V is actually the remote. The Viper remote start alarm system that it corresponds with is the Viper 5900.
How to take my viper remoter off vabration. a
To enter programming mode
Press the Program button on the back of the remote or hold the
four remote control buttons on the front of the remote simultaneously
until one long beep is heard. Programming Mode has now
been entered.
Beep/Vibrate Mode
Within five seconds of entering Programming Mode, press Lock.
The remote control will beep once for on, twice for off. The
vibrate icon (13) will also turn on/off with each press.
Here's the owners manual for that system:
http://www.directeddealers.com/manuals/og/viper/G5301V_05-06post.pdf
remote programming starts on page 15.
Viper Alarm app says Not Armed but locked
If the Viper Alarm app is showing that the alarm is "Not Armed" but the vehicle is locked, it is possible that the alarm system is not communicating properly with the app.
One solution is to try resetting the alarm system by disconnecting the car battery for a few minutes and then reconnecting it. This can sometimes help to reset the communication between the alarm system and the app.
If this does not work, it may be necessary to contact Viper customer support for further assistance. They may be able to provide troubleshooting tips or suggest a software update for the app or alarm system.
Not finding what you are looking for?