Toshiba 2860 Copier - Answered Questions & Fixed issues

you can set 08-629 code to 0 it works

08>89>0

Select duplex or 2x2 fuction in copying ..

1) If background be black, thats the problem of High Voltage, main charger, lower charger 2)if whole copy black thats the problem of drum bios or beam or spark something

service toner hopper

no. you must clear the jams of faults first

Hard to say on that old thing. To be honest the 2860 is worn out, ancient technology. I advise you to upgrade ASAP. It's obsolete, most parts are unavailable and most technicians nowadays have never seen one. They were great machines, tanks to be honest, but emphasis on WERE. Time to let go.

Garry, you're gonna need a new harness buddy. And with that being a 2860, sorry to say it's obsolete and chances of finding a new harness is somewhat unlikely. Time for a much needed upgrade, it's an analog run away.

use original toner OR reset toner indication

Check the actuator....maybe out of position

try to clean the mirrors inside
if still dark and it makes over 50000 paper you need to change the drum & developer & blade

Hello
There could be a few reasons for this problem.
The first being the 6th mirror is dirty. To get to this mirror the cleaner unit will have to be removed from the machine.
Then the black cover with the **** glass will also have to be removed.(Toner shield)
Once the black cover is removed the 6th mirror will be exposed. (the black cover is held in place with clips and not screws, no tools are required to remove the black cover.)
Very carefully wipe the exposed mirror with a soft cloth, and clean the glass on the black cover, refit the black cover and cleaner unit.
Test the machine, if the problem is not sorted out then we will have to look a little deeper.
It could also be that the roll guides in the developer unit are worn and need to be replaced.(roll guides keep the developer unit a certain distance away from the drum and are located on the ends of the magnetic roller.)
The machine could also not be standing level.(the developer material culd be all on one side in the developer unit)
The drum could be worn and needs to be replaced.
The carona wires could be contaminated, and also need to be replaced.
The replacement of the roll guides, developer material, drum and carona wires should be carried out by a qualified technician. (that is only my reccomendation)

I hope that it is only the 6th mirror that is dirty.
Regards

sonds like the developer is faulty replace as well as the roll guides

Try the web. Just google the brand and model number and type the particular manual of interest to you (operational or service etc...). You will be directed on what to do further.

Hi is the exposure lamp coming on when you copy also check the main charge unit on the drum unit assembly

check the transfer charger if the corona wire is connected if it is been cut replace a new corona wire

Hallow, in order for you to download catalog or brochure, please click here and specify toshiba copier and then select 2060/2860.Here you can download the manual or brochure and save on a desktop or any other location you so desire. Happy new year.

which is the error code.

clean the optics mirror then check the exposure lamp