Toshiba e-Studio 350 Copier - Answered Questions & Fixed issues
Toshiba estudio 455 firmware update failed
Hi guys please have suffer a lot to download estudio 455 firmware but no avail please can anyone help me with the correct site to download the latest firmware may the Lord God bless anyone that will be of help
How can i fix the
1. Check and clean the main charger, replace if required.2. Check and clean the transfer/sep. unit, replace if required. 3. Before you replace the HVT board, check HVT connector bracket (the black color plastic piece mounted on the machine frame where the main charger connects). If this part is damaged or cracked, the high voltage will arc through this, which can cause C970. (found in several machines).
Bypass feed
this is set by the computers driver
or its detecting no paper in the main drawers
HOW TO RESET NETWORK INITIALIZING LIGHT TOSHIBA
Press User Functions>Admin>then enter 123456 (password) then go to the TCP/IP section and clear all the IP addresse/s out of the fields then hit enter.
Press Back>Back>Copy>User Functions>Shutdown. then turn the machine back on.
How to reset cdfo error toshiba estudio 355se
CDF0 Offset tray related
service call
Initialization error of the offset tray: The home position of
the separator cannot be detected when the power is
turned ON.
[CDF0] Initialize error of the offset tray (e-STUDIO205L/255/305)
(1) Check if each connector between the OCT motor and OCT board (CN261) is disconnected.
(2) Check if each connector between the OCT board (CN261) and LGC board (CN302) is
disconnected.
(3) Check if each connector pin is removed or the harness is broken.
(4) Check if any conductor pattern on the OCT board and LGC board is short circuited or open
circuited.
(5) Replace the OCT motor.
(6) Replace the OCT board.
(7) Replace the LGC board.
http://electronicshelponline.blogspot.com/
Why Toshiba estudio 350 Ink missing
Check the developer drive gear,
behind the mother board,,,view the two clutch left side clutch is developer drive clutch, open & check the gear.
Error code on toshiba e studio 350 code is f110
Communication error between System-CPU and
Scanner-CPU
Check if the harness connecting the SYS board and SLG board is disconnected or open circuited.
Replace the SYS board. Replace the SLG board.
Toshiba e20 Call for service
Stop jam at the exit sensor: The trailing edge of the
paper does not pass the exit sensor after its leading
edge has reached this sensor.
Not finding what you are looking for?