20 Most Recent Waterco Baker Hydro 80K Btu Titanium Manual Pool Heat Pump - Page 8 Questions & Answers

yes, the instructions do not specifies.

Question edited for full 'make model (what it is)'. Almost certainly yes. https://www.google.com/search?q=pdaps4+pool+temperature+sensor ..

if screw holds impeller on it has a backwards thread remove then hold back of motor and turn off impeller regular threads

water getting into control panel is sorry a common failure on these , ruins electronics inside

Ideas and videos in the link. https://www.google.com/search?q=saluspa+inflatable+hot+tub+when+i+plug+it+i+it+lights+up+for+a+few+seconds+then+goes+off ..

no info generic answer need a mukti meter to test circuits components -motor-heater

check inside see if water lines loose or off or possible belt loose

Did you test the sensor first. ....................

cooler ? might have a bad pump is going bad

check and test thermostat an circuit

Check the thermocouple on the water pipe.

Question edited for clarity. Question moved from Larry's Computer category and moved to Pool Pumps. The company no longer make pumps as shown in Larry's link. They now sell inflatables for pools, and certainly didn't MAKE the pump. They did a deal and got a company to put their name on one. Google seems to think this is your pump. If not, it is time for a new one. Buy a brand leader like Grundfoss. https://images.inyopools.com/cloud/documents/pool-pump-owners-manual.pdf https://www.google.com/search?q=Air+Cloud+WT-6006+manual ..

Mike,Yes LOC is a standard topside lock code.Try these common unlock codes,Press & Hold Jet Button for 6 secondsorPress & Hold Temp Up & Temp down for 6 seconds.Possibly your jet button is faulty i.e. it is broken internally or when it is pressed the button sticks in the on position and locks out the panel.If those common codes don't work let me know which brand/topside control your spa has and I will get a more specific answer.

there are troubleshooting tips in the link https://www.google.com/search?q=purex+triton+minimax+250 ..

check circulation pump unit is overheating

check the high limits in the header see if corroded or bad wire

yes also can be problem with thermocouple

"A sauna is a small room or house designed as a place to experience dry or wet heat sessions, or an establishment with one or more of these and auxiliary facilities.A sauna session can be a social affair in which the participants disrobe and sit or recline in temperatures typically between 70 degrees C (158 degrees F) and 100 degrees C (212 degrees F). This induces relaxation and promotes sweating.Saunas can be divided into two basic styles: conventional saunas that warm the air or infrared saunas that warm objects. Infrared saunas may use various materials in their heating area such as charcoal, active carbon fibers, and other materials."

Question edited for typos and English. Question moved from Laundry Dryers and Pool and Spa as a wild guess. 'Make model (what it is)' in ALL questions please. Wild guess, but yes a faulty control board or the connections to it or from it. If it uses a transformer, check power in and out.

Hi, please check that the control panel can control other things outside of the temperature. If this is the case, then maybe the pool components (ie thermostat) were not added properly or are incompatible with your control panel. If the control panel does control anything, then the full re-installation needs to be done. Thank you.