20 Most Recent TORK 601A 24 Hr Mechanical Outdoor Timer 1 Grounded Outlet 15 Amps Questions & Answers

Timer is not 100% identified.
120Volt Tork 1101 timers can be fixed with repair parts.
Generally, plug-in-outlet timer has gone bad, then it cannot be fixed.

Open following links to identify timer and then add a comment.
http://waterheatertimer.org/Tork-timers-and-manuals.html
http://waterheatertimer.org/Tork-consumer-timers-and-manuals.html

Add a comment for more help

Upvote the help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

The Tork 602A mechanical outdoor timer with 2 grounded outlets.
Tork 601A and 602A manual
http://waterheatertimer.org/pdf/Tork-601A-Manual.pdf
Manual has images of timer that will help.

Plug timer into outdoor outlet.
To set current time, rotate dial clockwise until current time lines up with arrowhead located on inner dial.
Dial is divided into light and dark sections that represent day or nighttime hours.
Reset time after power outage.

96 pins located around timer dial are used to set on-off times.
Each pin represents 15 minutes in 24 hour day
Move pins in-or-out with fingernail or ink pen to set timer on-off functions.
With Tork timers, usually when pins are out, timer is ON.
When pins are in, timer is OFF.
To double-check pin setting, manually rotate timer to watch when lights turn on-off.

Set multiple ON/OFFs each day.
Change on-off times by resetting a pin or two.
Timer repeats every 24-hours.

Manual ON/TIMER switch is located on inner dial.

Set Manual switch to TIMER for programs to operate.
To override time and turn on Load, move override to ON position.

Tork 601A outdoor timer manual:
http://waterheatertimer.org/pdf/Tork-601A-Manual.pdf

Timer has 1 125Volt receptacle located on bottom of timer

96 captive tabs located around timer dial allow times to be set each 15 minutes.
Move pins in-or-out with fingernail or pen to set timer on-off functions.
Minimum time setting is 15 minutes.
Maximum time setting 23 ¾ hours.
Set multiple ON/OFFs each day.
Timer repeats every 24-hours.

Dial is divided into daylight and nighttime hours.
Nighttime PM hours are on dark background.
Daylight hours are on light background.

To set timer, rotate dial clockwise until current time lines up with arrowhead located on inner dial. Reset time after power outage.
Manual ON/TIMER switch located on inner dial.
To override time and turn on Load, move override to ON position. To use timer functions, move override to TIMER position

Instructions for tork timers:
http://waterheatertimer.org/Tork-consumer-timers-and-manuals.html

Tork makes several timers that look similar.
Link above has photos of each type with manuals.

Edited 'Trok' to 'Tork'. Then with the right maker, we can find the Tork Timer Category. Also added (what it is). It is new, it is under warranty, take it back for free replacement. If you fiddle with it, you void that warranty/ The only thing you can try is cutting the power at the breaker for 5 minutes. If that doesn't work, disconnect it for 3 days as it has a 2 day backup. See if there is a battery compartment with a dead bulging capacitor in it. Power Outage Backup: Permanent schedule retention with memory module. Supercapacitor provides 2 days of real time backup. http://www.nsiindustries.com/catalog/nsiproducts/tork/tork-digital-time-switches/in-wall-and-plug-in-timers/rz307 https://www.google.com/search?q=Tork+RZ307 ..

contact tork @ 888-500-4598 they can get you one and it may be available online at their web site??

Question edited for clarity. Try the parts suppliers in the link if the switch is falling apart. It is a well known and respected make. If you can get behind the switch, you might find screws if the switch is just loose. https://www.google.com/search?q=tork+tu40+replacement+parts Robertshaw are the distributor. It may be under warranty. https://www.robertshaw.com/Products/Energy/Electric-Timers/TU40/?cat=2147484366 ..

Make sure the screw in the middle of the dial is tight and make sure the screws on the tappets are tight. Tork are made by NSi Industries. Support is on the page below.

NSI Industries: Home

NSI Industries https://www.nsiindustries.com The NSI family of brands are your reliable partners in Electrical, HVAC and Building Technologies. We carry a full line of professional-grade products and ...

TORK

TORK, a pioneer in the electrical industry since 1922, offers ...

Mechanical Timers

All Mechanical Timers · TORK 101 Mechanical Time Switch ...

All Products

Innovation and Quality: NSI Connectors Meet NEC 230.46 ...

Contact Us

We're Here to Help General Inquiry Contact Quick Links Customer ...

The is nothing online. Ask NSI Industries if they can service it? You may even get a warranty repair if a spring boke.

TORK 1101B 24-Hour Indoor Mechanical Time Switch 40A ...

NSI Industries https://www.nsiindustries.com > product > tork-1101b... TORK 1101B 24-Hour Indoor Mechanical Time Switch 40A 120V, SPST Outputs ; Repairable Units · Mechanical time switches can be repaired when components reach the ... https://www.google.com/search?q=Tork+1101+parts+diagram We are Fixya, not Tork, we just have a category for it. ..

best solution is to replace it same one at HD is $55.00

Source hot pigtailed to timer terminals 1, 5, and 8 neutral source pigtailed to load one https://www.fixya.com/support/t29929835-tork_dtu40_wired_120v_2_loads_power doodle jump

If your Tork timer is turning on at times when it's not supposed to, there may be a few potential causes. Here are some things to check:

1. Check the programming: Make sure the timer is programmed correctly and that you have set the correct on/off times.
2. Check for stray signals: If your Tork timer is receiving stray signals from other devices, this could cause it to turn on or off unexpectedly. Try moving the timer to a different location, away from other electronics.
3. Check the power source: Make sure the timer is receiving a steady power source. If the power is interrupted or fluctuates, it could cause the timer to malfunction.
4. Check for interference: Interference from other electronics, such as nearby radios or TVs, could be causing the timer to malfunction. Try moving the timer to a different location or turning off nearby electronics to see if this solves the problem.

If none of these solutions work, it's possible that there is a problem with the timer itself and it may need to be repaired or replaced.

It is generally not recommended to reuse a critical fastener like the rear spinal nut on your 2000 Ford Focus. These nuts are designed to provide a precise amount of clamping force and ensure proper alignment of the rear suspension, so reusing them may compromise the safety and performance of your vehicle.

Hi, since this product seems not to be sold by companies at this time, I would suggest scheduling a repair with home depot by calling 1 888-500-4598 . They should be able to fix the light on Tork timer . Thank you.

Unfortunately it is history

is the timing wheel turning? without model number and age there is no way to help you.

possible too much draw at start up

there should be a cover to slide over lens. you may it installed in shade where sun is blocked. there is a time delay that you can program. copy and paste http://www.nsiindustries.com/UserFiles/Documents/Product/LI.794.E.Photocontrol.2000.3000.Series.pdf

For 5 minutes, I wouldn't bother, 1/2 to an hour, yes. Section 7.0 and 7.1, 7.3 and 7.3 applies. You set it for Automatic by Latitude. Then for Todays time SET SUNSET ON Press DAY to show today's sunset time. Day + Enter. Then the Offset SunSET. Minutes +5 and Enter Then 7.3 SET SUNRISE OFF Press DAY to show today's sunrise time. Day+Enter Then the Offset SunRISE. Minutes +5 and Enter Or Phone them and get them to walk you through it on the phone. https://assets.usesi.com/product-media/installation-instructions/USESI_22566_installation_instructions.pdf ..