20 Most Recent Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer - Page 9 Questions & Answers

check your belt, they do stretch or break

perhaps the motor oil is low some motors have similar problems if run on a hill side where oil all goes to 1 side of motor

The seat switch energizes the operator presence relay which prevents the brake switch from connecting the ignition kill circuit to battery negative when brake is disengaged.

safety circuit

perhaps not getting fuel well have seen hoses that went bad on the inside and very little fuel could get part that area of the hose

a washer and a pin

perhaps the drive belt broke fixya has no way to see it

Likely a GCV160... see manual from Honda website.

https://cf.hondappsv.com/files/OM/OM000230GLOBAL/39Z0LA410_EN.pdf

rust usually is the problem spray WD 40 on all the places that metal touches another part

hold the small metal rod on handlebar back that is the tightener

look under the seat or the hood only place they have ever been

take it off and see if the gear is broken (you can buy the gear at napa)or did the shaft the gear rides on got a little rusty over the winter

What is the spark plug gap for a Craftsman lawn mower with a 6.75 engine? in the Product Specifications on page 11. As noted there, the gap should measure . 045". Aug. 18, 2008

What is the spark plug gap for a Craftsman lawn mower with a ...

https://www.shopyourway.com > questions

google search results below https://www.google.com/search?q=Bushwacker+2.6+amps.+How+can+I+sharpen&oq=Bushwacker+2.6+amps.+How+can+I+sharpen&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

how do you explain this then? no regulator, has electric start

perhaps it was over filled we have no fix I know of for that

i tried and could not find one. recheck that model number

WWW.SEARSPARTSDIRECT.COM

only if they are the exact same style deck mine are same widtth cut but mounts are different and the better tractors has 3 blades other only has 2

tip the tractor on its side and install a longer pipe nipple with a cap. most are 1/4 npt threaded