Top 20 Olympus Pearlcorder J300 Handheld Cassette Voice Recorder Questions & Answers

If the manual you would like to download is not shown above, or if you would like an Olympus representative to assist you, please email at [email protected].

Manuals can be downloaded at www.olympusamerica.com

by switching the speed from 2.4 to 1.2 on th recorder

Hello your Spring goes on bottom rigth when you open the cassette door is in the inside like a small round one if you have problems try to put it back you can send it for service to
Send an email to [email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem

I have found a manual for the Olympus Pearlcorder J300 and J500. Will send the pdf if requested!

Hi,

You could download the same from :-

http://www.olympusamerica.com/cpg_section/cpg_support_product.asp?id=529

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Hello is real simple just press the reset button if this don't solve your problem it needs to send to service you can send it to Send an email to [email protected] or call (800) 644-9525. Please indicate model, serial and detailed description of problem

put in 2 AAA batts and insert a tape, then push record to record, and expirament!

VCVA
set it to VCVA on the left side and push record, will only record when detects noise

Hello make sure the switch that is close to the power jack is on the off position sound like you have VCV on or VOX thats voice activate recording that is only record when is person talking

FIXED, on the left side switch it to VCVA the push record, it will only record when it detects noise

Hello check the switch for VOX needs to be in the middle position make sure is not on F.Play
If the speed doesn’t change is your main motor

You can download a manual from the manufacturer's web site at http://www.olympusamerica.com/cpg_section/cpg_support_product.asp?id=529

Just put the switch on the VOX position and used the volume control to set the gain for Voice activation

Question edited for a lot more clarity. Question moved from Olympus Camera category. Olympus seems to think it doesn't exist. https://cs.olympus-imaging.jp/en/support/imsg/vtrek/download/manual/ But I see it on Amazon, unless they are Chinese clone copies. The model numbering of 'S-number', doesn't match apart from the 'W-20'. Write to Olympus and ask. https://www.google.com/search?q=olympus+s924+manual ..

It doesn't look like they ever had them. The Firmware link goes to software and there is no Software link.. https://learnandsupport.getolympus.com/support/ws-331m-digital-voice-recorder#section-download-software It is dangerous getting firmware from anyone other than the manufacturer. https://learnandsupport.getolympus.com/support/ws-331m-digital-voice-recorder#section-download-software ..

It sounds like the water damage may have caused the down volume button to malfunction. While it may be possible to fix the button, it would require opening up the device and performing some troubleshooting, which can be difficult if you don't have experience with electronics. I would recommend taking the recorder to a professional repair shop or contacting Olympus customer support to see if they can assist you with repairs. If the device is still under warranty, they may even be able to provide a replacement.

I don't see a current driver for it at this driver guide site. https://www.driverguide.com/driver/download/Olympus-Digital-Voice-Recorder You may try to see if the manufacturer has one. I provide a link to the manufacturer at the bottom; you have to drill down to a chat opportunity from there. I think you are going to have to run the pertinent software in compatibility mode, probably for XP or Windows 7. You could try running the XP driver on an XP machine if you have one collecting dust. That is, if the driver exists in the links at the old posts below. This recorder has been around from at least 2009. Alternatively, you can try the Olympus chat to inquire if a current driver might work on it. I'm under the impression that installation of any driver for the device is a little tricky at the best of times. Here is an old Fixya page from 2009 that hints at such: https://www.fixya.com/support/t2505481-failure_install_olympus_vn_600pc https://www.fixya.com/support/t16043814-need_driver_digital_voice_recorder_vn https://om-digitalsolutions.com/en/directory/americas.html

Send it in for service. Details on the last page. https://www.gov.nl.ca/education/files/k12_evaluation_vn-7200.pdf ..

not if Olympus or a dealer of them can not get you one

Purchase a new one. They are inexpensive and liquid damage is sometimes not repairable.