Polaroid Polaview 211E Multimedia Projector - Answered Questions & Fixed issues

check all the fans and filters, make sure all the fans are turning properly and make sure none of the filters are plugged there is usually only 1 but there may be more.

You may have inadvertently switched your projector to a different input mode, or the mhz refresh rate, etc., Jon.

If you are handy with allen wrenches, quality screw drivers, and the like, you might 'try' opening up the can of worms and gently manipulating the red LCD panel (it will be obvious--a magenta color when off), by slightly loosening the holding screws, then moving--ever so slightly, the panel untill the ghost disappears. Do not do this though, untill you mark the present position on the top and bottom of the LCD panel. Take pictures, far and close-ups, as you go so you can reassemble the unit. The typically three LCDs can be located by finding the prism cube, located under the circuit board, and just before the output lens. Be patient, and have fun. I did this with an 'out of wack' throw away, and now it is just as enjoyable as my 'dimmer' HDTV projector. Even side by side, from 8 feet away, when both are making 72" images, the HDTV is barely clearer, Jon.

Go to:

System Preferences (you can get there by clicking on the Apple Menu in the top left corner) -> Displays -> Detect displays

After you click "Detect Displays" your G3 should automatically send the display image to your projector.

Did you try going into MENU --> PICTURE --> SIGNAL MODE, and then pressing > to go through all the signal modes? On mine, most of the signal modes split the screen weirdly as you described, but one of them (in my case XGA3, but I'm not using a Mac) looks right.

Hi, Please unplug the device until it turns off. We should also ensure that it's not overheating and then leading to the error that you've just described. If the error occurs again, please ensure that card /id is loaded in the correct orientation and the machine isn't lacking any ink. Otherwise, you might need to return the device to factory defaults. Thank you.

Sorry, no longer compatible due to age.

Hello my Polaroid tower won’t come on when it’s plugged in. Please help

https://polaroid-pogo-app.en.softonic.com/android

one at a time will be ok nothing with staples or metal should be shredded in the machine

There is no such external reset buttons to modern TVs. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

If you have taken a photo and the light is flashing red, you may have a paper jam. Possible reasons why there is a jam could be: more than ten sheets of paper, bent paper, and backwards paper. To fix the jam, remove the paper carefully without damaging the camera and insert new sheets making sure they are oriented correctly and do not exceed more than ten sheets. Also, make sure you are using good quality paper.

Hi. I think there are two people around the world that have a Lumia 800 AND a Pogo (including myself). The windows Phone 7.5 doesn't support the BlueTooth Object Push Profile (OPP) Standard. But the Windows Phone 7.8 does (I have installed and it works)

try to reset with factory mode.

check drum inside cartridge

Phone 1-800-312-2615

Well the default PIN code for pairing your polaroid PoGo printer via Bluetooth is 6000.
Hope that helps. please let me know if you need further assistance
thanks for using fixya

If you didn't change anything, the standard code that comes with de pogo is 6000

The Pogo passcode cannot be changed. It is fixed at 6000.

you can get the manual from http://personalcare.manualsonline.com/manuals/mfg/genie/gl-10.html

thanks